Brilliance Junjie / FSV

Manual transmission fluid capacity & service interval

Brilliance Junjie / FSV manual transmission fluid capacity ranges from 1,6 to 2,1 liters. Service intervals include checking at 6000, 10000, and 20000 km, and changing at 10000, 30000, and 40000 km. The data covers 18 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Junjie / FSV 1.5 (67 kW), SY7150X1STBAB (2011- )
  • Use: Normal
  • Capacity 1,7 liter
  • Check 20000 km
  • Change 40000 km
  • Code: 5/1
Junjie / FSV 1.5 (67 kW), SY7150X1STBAB (2011- )
  • Use: Initial service
  • Capacity 1,7 liter
  • Check 6000 km
  • Change 10000 km
  • Code: 5/1
Junjie / FSV 1.5 (67 kW), SY7150X1STBAB (2011- )
  • Use: Severe
  • Capacity 1,7 liter
  • Check 10000 km
  • Change 30000 km
  • Code: 5/1
Junjie / FSV 1.5 (75 kW), SY7150WSBAB (2011- )
  • Use: Normal
  • Capacity 1,6 liter
  • Check 20000 km
  • Change 40000 km
  • Code: 5/1
Junjie / FSV 1.5 (75 kW), SY7150WSBAB (2011- )
  • Use: Initial service
  • Capacity 1,6 liter
  • Check 6000 km
  • Change 10000 km
  • Code: 5/1
Junjie / FSV 1.5 (75 kW), SY7150WSBAB (2011- )
  • Use: Severe
  • Capacity 1,6 liter
  • Check 10000 km
  • Change 30000 km
  • Code: 5/1
Junjie / FSV 1.5 (76 kW), SY7150X1SBAB/X1ZBAB/X1SHEVBAB (2011- )
  • Use: Normal
  • Capacity 1,7 liter
  • Check 20000 km
  • Change 40000 km
  • Code: 5/1
Junjie / FSV 1.5 (76 kW), SY7150X1SBAB/X1ZBAB/X1SHEVBAB (2011- )
  • Use: Initial service
  • Capacity 1,7 liter
  • Check 6000 km
  • Change 10000 km
  • Code: 5/1
Junjie / FSV 1.5 (76 kW), SY7150X1SBAB/X1ZBAB/X1SHEVBAB (2011- )
  • Use: Severe
  • Capacity 1,7 liter
  • Check 10000 km
  • Change 30000 km
  • Code: 5/1
Junjie / FSV 1.6 (73 kW), SY7160XSTBAB (2011- )
  • Use: Normal
  • Capacity 1,7 liter
  • Check 20000 km
  • Change 40000 km
  • Code: 5/1
Junjie / FSV 1.6 (73 kW), SY7160XSTBAB (2011- )
  • Use: Initial service
  • Capacity 1,7 liter
  • Check 6000 km
  • Change 10000 km
  • Code: 5/1
Junjie / FSV 1.6 (73 kW), SY7160XSTBAB (2011- )
  • Use: Severe
  • Capacity 1,7 liter
  • Check 10000 km
  • Change 30000 km
  • Code: 5/1
Junjie / FSV 1.6 (74 kW), SY7160ESBAB/EZBAB (2011- )
  • Use: Normal
  • Capacity 2,1 liter
  • Check 20000 km
  • Change 40000 km
  • Code: 5/1
Junjie / FSV 1.6 (74 kW), SY7160ESBAB/EZBAB (2011- )
  • Use: Initial service
  • Capacity 2,1 liter
  • Check 6000 km
  • Change 10000 km
  • Code: 5/1
Junjie / FSV 1.6 (74 kW), SY7160ESBAB/EZBAB (2011- )
  • Use: Severe
  • Capacity 2,1 liter
  • Check 10000 km
  • Change 30000 km
  • Code: 5/1
Junjie / FSV 1.6 (90 kW), SY7160XSBAB (2011- )
  • Use: Normal
  • Capacity 1,7 liter
  • Check 20000 km
  • Change 40000 km
  • Code: 5/1
Junjie / FSV 1.6 (90 kW), SY7160XSBAB (2011- )
  • Use: Initial service
  • Capacity 1,7 liter
  • Check 6000 km
  • Change 10000 km
  • Code: 5/1
Junjie / FSV 1.6 (90 kW), SY7160XSBAB (2011- )
  • Use: Severe
  • Capacity 1,7 liter
  • Check 10000 km
  • Change 30000 km
  • Code: 5/1

Additional Notes

  • The Brilliance Junjie / FSV manual transaxle fluid capacity varies by engine variant. The 1.5 (67 kW) SY7150X1STBAB, the 1.5 (76 kW) SY7150X1SBAB/X1ZBAB/X1SHEVBAB, the 1.6 (73 kW) SY7160XSTBAB, and the 1.6 (90 kW) SY7160XSBAB all share a 1.7-liter transaxle capacity, while the 1.5 (75 kW) SY7150WSBAB holds 1.6 liters.
  • The 1.6 (74 kW) SY7160ESBAB/EZBAB stands apart with a 2.1-liter manual transaxle capacity, the largest figure across all listed Junjie / FSV variants. A higher transaxle fluid capacity generally reflects a larger or differently designed gearbox housing compared to units requiring less fluid volume.
  • Across all six engine variants, the normal-use service interval calls for a fluid check at 20,000 km and a full fluid change at 40,000 km. Normal use typically refers to everyday driving conditions without sustained heavy loads, extreme temperatures, or frequent stop-and-go operation.
  • Under severe use conditions, the check interval shortens to 10,000 km and the change interval to 30,000 km for all listed variants. Severe use generally encompasses conditions such as towing, off-road driving, or operation in extreme climates, which accelerate fluid degradation.
  • An initial service interval is specified for all variants, with a fluid check at 6,000 km and a change at 10,000 km. Initial service intervals are applied to new or freshly serviced units to remove metal particles and contaminants generated during the break-in period of transmission components.
  • The initial service change interval of 10,000 km is notably shorter than both the normal 40,000 km and severe 30,000 km change intervals, reflecting the elevated contamination risk during early component wear-in rather than ongoing operational stress.
  • The 1.5 (76 kW) variant covers three model codes, SY7150X1SBAB, X1ZBAB, and X1SHEVBAB, all sharing identical 1.7-liter capacity and the same check and change intervals across normal, severe, and initial service conditions.
  • All 18 rows across the six engine variants share the same three-tier service structure: initial service, normal use, and severe use. The fluid capacity figure remains constant within each variant regardless of which use condition applies, confirming that capacity is a fixed transaxle specification rather than a service-variable figure.

Other Systems