Brilliance Junjie / FSV

Additional Notes

• The Brilliance Junjie / FSV hydraulic brake system holds a uniform 0.7 liter capacity across all six engine variants covered in these specifications, spanning the 1.5-liter units (67 kW, 75 kW, and 76 kW) and the 1.6-liter units (73 kW, 74 kW, and 90 kW). A brake fluid capacity in this range is typical for a compact passenger car reservoir serving a standard hydraulic circuit.
• Under normal use conditions, the brake fluid change interval is set at 40,000 km or 24 months for all variants. The dual-trigger format means whichever limit is reached first governs the service event, a common approach given that brake fluid degrades through moisture absorption over time regardless of distance traveled.
• Under severe use conditions, the change interval shortens to 30,000 km or 18 months across all variants. Severe operating conditions typically involve more frequent or intense braking events, which accelerate heat cycling in the fluid and increase the rate at which its boiling point drops.
• A separate severe-use entry labeled "first change only" specifies a change interval of 40,000 km or 24 months, matching the normal-use interval. This applies exclusively to the initial fluid change in severe-use operation, after which the standard severe interval of 30,000 km or 18 months governs subsequent changes.
• An initial service condition is specified for all variants with a check interval of 5,000 km or 3 months and no change interval listed. The check-only nature of the initial service entry reflects the early-life inspection practice common in new vehicle maintenance schedules, where the system is verified rather than serviced.
• The normal and severe use conditions both share a check interval of 10,000 km or 6 months, while the initial service condition carries a tighter check interval of 5,000 km or 3 months. The shorter initial check interval is twice as frequent as the ongoing check schedule.
• All six engine variants share identical brake fluid service intervals and capacity values across every use condition. The three output levels within the 1.5-liter family (67 kW, 75 kW, 76 kW) and the three within the 1.6-liter family (73 kW, 74 kW, 90 kW) produce no variation in any brake fluid specification.
• The 76 kW variant is identified by three chassis codes — SY7150X1SBAB, SY7150X1ZBAB, and SY7150X1SHEVBAB — the last of which carries a "HEV" designation indicating a hybrid electric vehicle configuration. Despite the hybrid powertrain designation, the hydraulic brake system capacity and all service intervals remain identical to the non-hybrid 1.5-liter variants.