BMW X2, U10 (USA)
Coolant capacity & service interval
BMW X2, U10 (USA) models require coolant with a capacity range of 1,2 to 9,2 liters. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| X2 M35i xDrive (2024- ) |
|
Additional Notes
- The BMW X2 M35i xDrive cooling system is divided into two separate circuits, with the high temperature cooling circuit holding 9.2 liters and the low temperature cooling circuit holding 1.2 liters, bringing the total combined coolant volume to 10.4 liters.
- The 9.2-liter figure for the high temperature cooling circuit reflects a service fill capacity, representing the volume of coolant required to properly fill the primary engine cooling loop under normal operating conditions.
- The low temperature cooling circuit's 1.2-liter capacity is notably smaller than the high temperature circuit, consistent with its role in managing heat for auxiliary systems such as charge air cooling or power electronics rather than the main combustion cycle.
- Both capacity values are specified under normal use conditions, meaning the 9.2-liter and 1.2-liter figures apply to standard service scenarios rather than severe-duty or first-change-only contexts.