BAIC Senova BJ40
Manual transmission fluid capacity & service interval
BAIC Senova BJ40 manual transmission fluid capacity is 2,6 liters. Service intervals occur every 40000 km or 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| BJ40 (150 kW) (2023- ) |
|
| BJ40 (160 kW) (2023- ) |
|
| BJ40 (165 kW) (2023- ) |
|
| BJ40 (170 kW) (2023- ) |
|
| BJ40 (184 kW) (2023- ) |
|
Additional Notes
- The BAIC Senova BJ40 manual transaxle fluid capacity is 2.6 liters across all five power variants — 150 kW, 160 kW, 165 kW, 170 kW, and 184 kW — in the 2023 model year.
- A transaxle is a combined unit housing the transmission and axle differential in a single assembly, and the 2.6-liter figure represents a service fill capacity rather than a full overhaul or dry-fill volume.
- The fluid change interval is specified at 40,000 km or 24 months, whichever comes first, and applies under normal use conditions for all five power variants.
- The dual-trigger interval structure — distance and time — means a vehicle covering low annual mileage would still require a fluid change at the 24-month mark under normal use conditions before reaching 40,000 km.
- The uniform 2.6-liter capacity across the 150 kW through 184 kW variants indicates a shared transaxle housing design despite the spread of 34 kW between the lowest and highest output configurations.
- The identical 40,000 km / 24-month change interval across all five power variants reflects a single service schedule applied regardless of output level under normal use conditions.