Austin A60, ADO38

Manual transmission fluid capacity & service interval

Austin A60 and ADO38 models require manual transmission fluid with a capacity of 2,56 liters. Service intervals include checks at 1500 km and changes at 800 km or 9000 km. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
A60 Cambridge Diesel (1962-1969)
  • Use: Normal
  • Capacity 2,56 liter
  • Check 1500 km
  • Change 9000 km
  • Code: 4/1
A60 Cambridge Diesel (1962-1969)
  • Use: Initial service
  • Capacity 2,56 liter
  • Change 800 km
  • Code: 4/1
A60 Cambridge (1961-1969)
  • Use: Normal
  • Capacity 2,56 liter
  • Check 1500 km
  • Change 9000 km
  • Code: 4/1
A60 Cambridge (1961-1969)
  • Use: Initial service
  • Capacity 2,56 liter
  • Change 800 km
  • Code: 4/1

Additional Notes

  • The Austin A60 Cambridge manual transmission holds 2.56 liters of fluid, a figure that applies uniformly across both the petrol variant (1961-1969) and the diesel variant (1962-1969).
  • Under normal use conditions, the manual transmission fluid on the A60 Cambridge is subject to a change interval of 9,000 km, with a level check scheduled at every 1,500 km.
  • An initial service change interval of 800 km is specified separately from the normal 9,000 km change interval, reflecting the break-in period during which transmission components generate higher levels of wear particles in the fluid.
  • The 2.56-liter capacity figure appears consistently across both the normal and initial service rows for each variant, indicating a single fill volume regardless of whether the service is a routine drain-and-fill or a first-change procedure.
  • The A60 Cambridge Diesel shares an identical manual transmission fluid capacity and service schedule with the petrol A60 Cambridge, including the 800 km initial change and the 9,000 km normal change interval.

Other Systems