Austin A60, ADO38
Automatic transmission fluid capacity & service interval
Austin A60 and ADO38 models require automatic transmission fluid with a capacity range of 2,98 to 6,57 liters. Service intervals consist of checks every 5000 km. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| A60 Cambridge (1961-1969) |
|
Additional Notes
- The A60 Cambridge automatic transmission holds 6.57 liters for the transmission itself, with an additional 2.98 liters attributed to the torque converter, placing the combined fluid volume well above what a simple gearbox service fill would suggest.
- The 2.98-liter torque converter capacity is listed separately from the main transmission figure, reflecting the fact that the converter retains its own fluid charge and does not drain fully during a standard service procedure.
- The Austin A60 Cambridge automatic transmission specification carries a 5,000 km check interval under normal use conditions, meaning the fluid level is to be inspected at that mileage rather than necessarily replaced on the same schedule.