Aston Martin DB11

Coolant capacity & service interval

Aston Martin DB11 coolant capacity ranges from 6,7 to 30 liters. Service intervals include checks every 16000 km or 12 months and changes every 60 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
DB11 V8 (2021-2023)
  • Use: Normal
  • Capacity 18,6 liter
  • Check 16000 km/ 12 months
  • Change 60 months
  • DB11 V8 (2021-2023)
  • Intercooler
  • Use: Normal
  • Capacity 6,7 liter
  • Check 16000 km/ 12 months
DB11 V12 AMR (2018-2023)
  • Use: Normal
  • Capacity 29-30 liter
  • Check 16000 km/ 12 months
  • Change 60 months
DB11 V8 (2017-2021)
  • Use: Normal
  • Capacity 18,6 liter
  • Check 16000 km/ 12 months
  • Change 60 months
  • DB11 V8 (2017-2021)
  • Intercooler
  • Use: Normal
  • Capacity 6,7 liter
  • Check 16000 km/ 12 months
DB11 V12 (2016-2018)
  • Use: Normal
  • Capacity 29-30 liter
  • Check 16000 km/ 12 months
  • Change 60 months

Additional Notes

  • The Aston Martin DB11 V12, covering both the standard variant from 2016-2018 and the AMR variant from 2018-2023, carries a cooling system capacity of 29-30 liters, a notably large volume that reflects the thermal demands of a twin-turbocharged 5.2-liter twelve-cylinder engine.
  • The DB11 V8 variants from 2017-2021 and 2021-2023 share a main cooling system capacity of 18.6 liters, a figure considerably lower than the V12 specification, consistent with the smaller displacement of the 4.0-liter eight-cylinder engine.
  • In addition to the main cooling circuit, the V8 variants across both 2017-2021 and 2021-2023 include a separate intercooler circuit with a capacity of 6.7 liters, bringing the total coolant volume across both circuits to approximately 25.3 liters.
  • The intercooler circuit on the V8 variants carries a check interval of 16,000 km or 12 months under normal use conditions, but no coolant change interval is listed for that circuit, distinguishing it from the main cooling system specification.
  • All configurations across the DB11 lineup share the same coolant check interval of 16,000 km or 12 months under normal use conditions, applied uniformly regardless of engine type or model year.
  • The coolant change interval of 60 months is consistent across the V12 standard, V12 AMR, and all V8 main cooling system entries, meaning a time-based replacement cycle of five years applies to the primary circuit in every listed configuration.
  • The V12 cooling system capacity is expressed as a range of 29-30 liters rather than a fixed value, which typically indicates a tolerance in the fill volume that may vary depending on bleeding procedures or system configuration at the time of service.

Other Systems