Alfa Romeo Brera, 939 (EU)

Additional Notes

• The Alfa Romeo Brera 939 (EU) automatic transmission fluid specifications cover a transaxle unit, meaning the transmission and drive axle assembly are housed together rather than as separate components.
• A dry fill capacity of 6.1 liters applies to all four configurations listed, representing the total fluid volume required when filling a completely empty or overhauled transaxle from scratch.
• A service fill capacity of 3.3 liters applies across all configurations, reflecting the partial volume exchanged during a routine fluid check or top-up rather than a full drain-and-refill procedure.
• The gap between the 6.1-liter dry fill and the 3.3-liter service fill indicates that a standard service interval does not replace the full fluid charge, as a portion remains retained within the torque converter and valve body passages.
• Both the 2.4 JTDm 20V (147 kW) and the 3.2 JTS V6 Q4 variants produced in 2006-2008 share a check interval of 30,000 km under normal use conditions.
• For the 2008-2010 production period, both the 2.4 JTDm 20V (147 kW) and the 3.2 JTS V6 Q4 variants carry a check interval of 35,000 km under normal use conditions, representing a 5,000 km extension compared to the earlier production period.
• Despite the difference in engine type between the diesel 2.4 JTDm 20V and the petrol 3.2 JTS V6 Q4, the transaxle fluid capacities remain identical at 6.1 liters dry and 3.3 liters service fill within each respective production period.
• The check interval revision from 30,000 km to 35,000 km between the two production periods applies uniformly across both engine variants, indicating a transmission-level specification change rather than an engine-specific one.