Acura MDX, YD1 (USA / CAN)
Transfer case fluid capacity & service interval
Acura MDX, YD1 (USA / CAN) transfer case fluid capacity is 0,4-0,5 liter. Service intervals include 48000 km/ 24 months and 72000 km/ 36 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MDX 3.5 V6 (CAN) (2003-2006) |
|
| MDX 3.5 V6 (USA) (2003-2006) |
|
| MDX 3.5 V6 (USA) (2003-2006) |
|
| MDX 3.5 V6 (USA) (2003-2006) |
|
Additional Notes
- The Acura MDX YD1 3.5 V6 transfer case holds between 0.4 and 0.5 liters of fluid, a range typical of compact transfer cases where the exact fill level is confirmed by a check plug rather than a fixed volume.
- Both the Canadian and USA market 3.5 V6 configurations share the same 0.4-0.5 liter capacity, indicating no regional difference in the transfer case unit itself across the 2003-2006 model years.
- Under normal use conditions, the Canadian market MDX 3.5 V6 transfer case fluid change interval is set at 48,000 km or 24 months, whichever comes first.
- The USA market MDX 3.5 V6 carries the same 48,000 km or 24-month interval under severe use conditions as the Canadian market normal use interval, meaning the severe schedule does not shorten the service period relative to the Canadian normal schedule.
- A first-change-only interval of 72,000 km or 36 months is specified for the USA market 3.5 V6, applying exclusively to the initial fluid service rather than recurring maintenance cycles.
- The first-change-only interval of 72,000 km or 36 months is notably longer than the 48,000 km or 24-month recurring interval, reflecting a factory-fill fluid formulation intended to last through the break-in period of the transfer case components.