Acura Integra, DE4 (USA / CAN)

Coolant capacity & service interval

Acura Integra, DE4 (USA / CAN) coolant capacity ranges from 5,6 to 8,3 liters. Service intervals are flexible based on the on board maintenance system. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Integra 2.0 Type S (CAN) (2023- )
  • Use: Flexible (on board maintenance system)
  • Capacity 8,3 liter (Overhaul capacity)
  • Capacity 6,7 liter (Service fill)
Integra 2.0 Type S (USA) (2023- )
  • Use: Flexible (on board maintenance system)
  • Capacity 8,3 liter (Overhaul capacity)
  • Capacity 6,7 liter (Service fill)
Integra 1.5T (CAN) (2022- )
  • Use: Flexible (on board maintenance system)
  • Capacity 5,6-5,8 liter (Service fill)
Integra 1.5T (USA) (2022- )
  • Use: Flexible (on board maintenance system)
  • Capacity 5,6-5,8 liter (Service fill)

Additional Notes

  • The Acura Integra DE4 cooling system service intervals across all listed configurations follow a flexible schedule governed by the on-board maintenance system rather than a fixed mileage or time-based interval.
  • The 1.5T engine, available in both CAN and USA markets from 2022, carries a service fill capacity of 5.6–5.8 liters, reflecting the range of coolant volume expected when refilling the system during routine maintenance without a full drain.
  • No overhaul capacity figure is listed for the 1.5T configuration, meaning only the service fill value of 5.6–5.8 liters is specified for that engine.
  • The Integra 2.0 Type S, introduced in 2023 for both CAN and USA markets, has a notably higher service fill capacity of 6.7 liters compared to the 1.5T, indicating a larger cooling system volume consistent with the more powerful engine.
  • An overhaul capacity of 8.3 liters is specified for the 2.0 Type S, representing the total system volume when the cooling circuit is fully drained and refilled, such as during a complete coolant flush or major engine work.
  • The difference between the 2.0 Type S overhaul capacity of 8.3 liters and the service fill of 6.7 liters suggests approximately 1.6 liters of coolant typically remains in the system during a standard service drain, which is a common characteristic of cooling systems where full drainage requires additional procedures.
  • CAN and USA market variants share identical capacity specifications within each engine configuration, with the 1.5T at 5.6–5.8 liters service fill and the 2.0 Type S at 6.7 liters service fill and 8.3 liters overhaul capacity respectively.

Other Systems