Abarth 500C / 595C / 695C, 312
Manual transmission fluid capacity & service interval
Abarth 500C / 595C / 695C, 312 manual transmission fluid has a capacity range of 1,55 to 1,65 liters. Service intervals occur every 30000 km or 24 months. The data covers 7 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 595/695C 1.4 T-Jet (121 kW) (2016- ) |
|
| 595/695C 1.4 T-Jet (132 kW) (2016-2023) |
|
| 595C 1.4 T-Jet (107 kW) (2016-2023) |
|
| 595C 1.4 T-Jet (118 kW) (2016-2023) |
|
| 595C 1.4 T-Jet (99 kW) (2016-2023) |
|
| 500C 1.4 T-Jet (118 kW) (2009-2016) |
|
| 500C 1.4 T-Jet (99 kW) (2009-2016) |
|
Additional Notes
- All configurations listed cover the Abarth 500C / 595C / 695C (312) manual transaxle, meaning the transmission and final drive share a common fluid sump rather than being serviced as separate units.
- The two 500C 1.4 T-Jet variants from 2009-2016, rated at 99 kW and 118 kW respectively, share an identical transaxle fluid capacity of 1.65 liters under normal use conditions.
- All 595C and 695C 1.4 T-Jet configurations introduced from 2016 onward carry a reduced transaxle capacity of 1.55 liters, which is 0.10 liters less than the earlier 500C generation figure.
- No fluid change interval is listed for the 2009-2016 500C variants, whereas every 2016-onward configuration specifies a change interval of 30,000 km or 24 months under normal use conditions, whichever comes first.
- The 24-month time-based component of the 595C and 695C change interval means a fluid replacement is due regardless of mileage accumulation if two years have elapsed, which is relevant for low-annual-mileage usage patterns.
- Across the five 595C and 695C configurations from 2016 onward, the 1.55-liter capacity and 30,000 km / 24-month interval remain uniform despite output differences spanning 99 kW, 107 kW, 118 kW, 121 kW, and 132 kW, indicating the same transaxle unit is used across the power range.
- A transaxle service fill capacity such as 1.55 or 1.65 liters reflects the amount of fluid required when draining and refilling a unit already in the vehicle, and may differ from a full overhaul or bench-fill quantity.