Zetor Major
Differential fluid capacity & service interval
Zetor Major differential fluid capacity is 5,5 liters. Service intervals include changes at 100 hours and 1000 hours. The data covers 12 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- Across all listed Zetor Major configurations, the front differential fluid capacity is 5.5 liters. In tractor applications, a front differential fill of this volume is consistent with a live front axle unit that houses gearing, bearings, and a limited-slip or open differential mechanism within a sealed housing.
- Every configuration carries two distinct service intervals for the front differential: a first-change interval at 100 hours and a normal recurring interval at 1,000 hours. The 100-hour first change is a break-in service, intended to remove metallic particles and contaminants generated during initial component wear-in before the standard long-term schedule takes effect.
- The 1,000-hour normal interval applies uniformly to the Major 60, Major 80, Major CL 60, Major CL 80, and Major HS 80 regardless of engine variant. In agricultural equipment, hour-based intervals reflect the variable and often seasonal nature of tractor operation, where calendar-based schedules would be less meaningful.
- The Major 80 is the only model listed with two engine options: the Deutz TCD2.9 L4 for 2014-2018 and the Zetor 1105 Tier 3 for 2013-2017. Despite the difference in engine origin and emissions tier, both configurations share identical front differential capacity and interval values of 5.5 liters, 100 hours first change, and 1,000 hours normal.
- The Zetor 1105 Tier 3 engine designation indicates compliance with Tier 3 emissions standards, a regulatory classification that governs non-road diesel engine exhaust emissions. The Major 80 with Zetor 1105 Tier 3 covers the years 2013-2017, making it the earliest configuration in the dataset.
- The Major CL 60 and Major CL 80 both use the Deutz TCD2.9 L4 engine and share the same front differential specifications as their non-CL counterparts. The CL designation typically refers to a trim or transmission variant within a model line rather than a mechanical change affecting differential sizing.
- The Major HS 80 with Deutz TCD2.9 L4, starting from 2017, carries the same 5.5-liter front differential capacity and the same two-stage service schedule as all other listed variants. The HS designation in tractor nomenclature commonly denotes a hydrostatic transmission option, though the differential fluid specifications remain unchanged relative to other Major 80 variants.