Valtra (Valmet) T3 HiTech

Differential fluid capacity & service interval

Valtra (Valmet) T3 HiTech uses differential fluid with a capacity of 7,4 liters. Service intervals include checking every 500 hours and changing every 1000 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • T133 H (HiTech) (2012-2014)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial axle)
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • T153 H (HiTech) (2012-2014)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial axle)
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • T173 H (HiTech) (2012-2014)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial axle)
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • T193 H (HiTech) (2012-2014)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial axle)
  • Check 500 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The front differential capacity across the T133 H, T153 H, T173 H, and T193 H models is 7.4 liters, applying specifically to the industrial axle configuration.
  • A 7.4-liter front differential fill is a relatively substantial volume for a front axle, reflecting the heavy-duty industrial axle design used across the Valtra (Valmet) T3 HiTech range.
  • The 7.4-liter capacity figure is consistent across all four model variants in the 2012-2014 production span, indicating a shared front axle assembly regardless of engine output differences between the T133 H and T193 H.
  • Under normal use conditions, the front differential fluid change interval is set at 1000 hours or 12 months, whichever comes first, combining both an operational hour threshold and a calendar-based limit.
  • The 12-month calendar interval running alongside the 1000-hour threshold means that even in low-utilization applications where 1000 hours may not be reached within a year, a fluid change is still due annually.
  • A separate fluid level check interval of 500 hours is specified under normal use conditions, placing an inspection point at the midpoint of the full change interval.

Other Systems