Valtra (Valmet) T3 HiTech

Coolant capacity & service interval

Valtra (Valmet) T3 HiTech coolant capacity is 30 liters. Service intervals include checking every 10 hours and changing every 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
T133 H (HiTech) (2012-2014)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
T153 H (HiTech) (2012-2014)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
T173 H (HiTech) (2012-2014)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
T193 H (HiTech) (2012-2014)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) T3 HiTech cooling system holds 30 liters across all four variants — the T133 H, T153 H, T173 H, and T193 H — for the 2012-2014 model years.
  • A 30-liter cooling system capacity is consistent with a large agricultural tractor engine, where substantial coolant volume is needed to manage heat across extended field operation cycles.
  • The coolant level check interval is set at every 10 hours of operation under normal use conditions, reflecting how frequently the system should be inspected rather than serviced in full.
  • The coolant change interval is specified at 2000 hours or 24 months under normal use conditions, meaning whichever threshold is reached first would trigger a full system drain and refill.
  • The 24-month calendar limit on coolant changes means that even in low-hour applications where 2000 operating hours may not accumulate within two years, a change is still required on a time basis.
  • All four variants — T133 H, T153 H, T173 H, and T193 H — share identical cooling system capacity and service interval specifications across the 2012-2014 range, with no differentiation by engine output level.

Other Systems