Valtra (Valmet) T series

Clutch fluid capacity & service interval

Valtra (Valmet) T series clutch fluid capacity is 0,2-0,25 liter. Service intervals include checking every 250 hours and changing every 2000 hours or 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
T121c Classic (2009-2010)
  • Use: Normal
  • Capacity 0,2-0,25 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
T121h HiTech (2009-2010)
  • Use: Normal
  • Capacity 0,2-0,25 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
T131c Classic (2009-2010)
  • Use: Normal
  • Capacity 0,2-0,25 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
T131h HiTech (2009-2010)
  • Use: Normal
  • Capacity 0,2-0,25 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
T151eh HiTech (2009-2010)
  • Use: Normal
  • Capacity 0,2-0,25 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
T161c Classic (2009-2010)
  • Use: Normal
  • Capacity 0,2-0,25 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
T161h HiTech (2009-2010)
  • Use: Normal
  • Capacity 0,2-0,25 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
T171c Classic (2009-2010)
  • Use: Normal
  • Capacity 0,2-0,25 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
T171h HiTech (2009-2010)
  • Use: Normal
  • Capacity 0,2-0,25 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months
T191h HiTech (2009-2010)
  • Use: Normal
  • Capacity 0,2-0,25 liter
  • Check 250 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra T series clutch fluid capacity is listed as a range of 0.2 to 0.25 liters across all 2009-2010 variants. A range rather than a fixed value reflects normal tolerance in hydraulic clutch reservoir fill levels, where slight variation is acceptable within the minimum and maximum marks.
  • The 0.2 to 0.25 liter figure represents a service fill capacity for the hydraulic clutch reservoir, not an overhaul or full system displacement volume. Hydraulic clutch circuits in agricultural tractors typically hold small fluid volumes confined to the master cylinder, lines, and slave cylinder.
  • A fluid check interval of 250 hours applies to all ten variants under normal use conditions. In tractor operation, 250 hours is a relatively short inspection cycle, consistent with the critical nature of clutch engagement reliability in field work.
  • The fluid change interval is set at 2000 hours or 24 months, whichever comes first, for all 2009-2010 T series variants under normal use. The dual-trigger format means calendar time can mandate a change even when the hour threshold has not been reached, which is common for hydraulic fluids subject to moisture absorption and thermal degradation over time.
  • Both the Classic (c) and HiTech (h) trim variants across the T121, T131, T161, and T171 model lines share identical clutch fluid capacities and service intervals for 2009-2010. The trim designation reflects differences in transmission and cab specification rather than clutch hydraulic circuit design.
  • The T151eh and T191h, which appear only in the HiTech specification for this period, carry the same 0.2 to 0.25 liter capacity and the same 250-hour check and 2000-hour/24-month change intervals as the rest of the range. No deviation in clutch fluid service requirements is associated with the higher model numbers in this dataset.

Other Systems