Valtra (Valmet) S2 series

Differential fluid capacity & service interval

Valtra (Valmet) S2 series differential fluid capacity is 15 liters. Service intervals include checks at 400 hours and changes at 50 hours or 800 hours. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • S232 Stage IIIa (2007-2010)
  • Front
  • Use: Normal
  • Capacity 15 liter
  • Check 400 hours
  • Change 800 hours
  • S232 Stage IIIa (2007-2010)
  • Front
  • Use: First change only
  • Capacity 15 liter
  • Change 50 hours
  • S262 Stage IIIa (2007-2010)
  • Front
  • Use: Normal
  • Capacity 15 liter
  • Check 400 hours
  • Change 800 hours
  • S262 Stage IIIa (2007-2010)
  • Front
  • Use: First change only
  • Capacity 15 liter
  • Change 50 hours
  • S292 Stage IIIa (2007-2010)
  • Front
  • Use: Normal
  • Capacity 15 liter
  • Check 400 hours
  • Change 800 hours
  • S292 Stage IIIa (2007-2010)
  • Front
  • Use: First change only
  • Capacity 15 liter
  • Change 50 hours
  • S322 Stage IIIa (2007-2010)
  • Front
  • Use: Normal
  • Capacity 15 liter
  • Check 400 hours
  • Change 800 hours
  • S322 Stage IIIa (2007-2010)
  • Front
  • Use: First change only
  • Capacity 15 liter
  • Change 50 hours
  • S352 SCR Stage IIIa (2007-2010)
  • Front
  • Use: Normal
  • Capacity 15 liter
  • Check 400 hours
  • Change 800 hours
  • S352 SCR Stage IIIa (2007-2010)
  • Front
  • Use: First change only
  • Capacity 15 liter
  • Change 50 hours

Additional Notes

  • The Valtra (Valmet) S2 series front differential holds 15 liters of fluid across all five variants covered — the S232, S262, S292, S322, and S352 SCR, all Stage IIIa configurations from 2007-2010.
  • A 15-liter front differential capacity is a substantial fill volume, consistent with the heavy-duty axle assemblies found on large agricultural tractors in this power class.
  • Under normal use conditions, the front differential fluid check interval is set at 400 hours across all listed variants, with a full fluid change required at 800 hours.
  • A separate first-change-only interval of 50 hours applies to the front differential on all listed S2 series variants. An early first change at 50 hours is standard practice for new or rebuilt differentials, as it removes metal particles generated during initial component break-in.
  • The 50-hour first-change interval and the 800-hour normal change interval are both tied to the same 15-liter capacity, meaning the first service requires the same full fluid volume as any subsequent normal change.
  • No variation in front differential fluid capacity or service intervals exists across the S232, S262, S292, S322, and S352 SCR within the 2007-2010 model range — all share identical 15-liter capacity, 400-hour check, and 800-hour change specifications under normal use.

Other Systems