Valtra (Valmet) S2 series

Coolant capacity & service interval

Valtra (Valmet) S2 series coolant capacity is 34 liters. Service intervals include checking every 10 hours and changing every 1200 hours. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
S232 Stage IIIa (2007-2010)
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 1200 hours
S262 Stage IIIa (2007-2010)
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 1200 hours
S292 Stage IIIa (2007-2010)
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 1200 hours
S322 Stage IIIa (2007-2010)
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 1200 hours
S352 SCR Stage IIIa (2007-2010)
  • Use: Normal
  • Capacity 34 liter
  • Check 10 hours
  • Change 1200 hours

Additional Notes

  • The Valtra (Valmet) S2 series cooling system capacity stands at 34 liters across all five variants — the S232, S262, S292, S322, and S352 SCR — each rated under Stage IIIa emissions compliance for the 2007-2010 model years.
  • A 34-liter cooling system capacity is notably large, consistent with high-output agricultural tractors where substantial thermal management is required to sustain engine performance under prolonged load conditions.
  • The coolant check interval is set at 10 hours across all S2 series configurations, reflecting a very frequent inspection cycle typical of heavy-duty machinery where early detection of coolant loss or contamination is critical to preventing engine damage.
  • The coolant change interval is specified at 1200 hours for all five S2 series variants under normal use conditions, meaning standard operating environments without the accelerated fluid degradation associated with severe-duty classifications.
  • The S352 SCR carries selective catalytic reduction technology, yet the cooling system capacity and service intervals remain identical to the non-SCR S232, S262, S292, and S322 variants, all sharing the 34-liter capacity with 10-hour checks and 1200-hour changes.
  • The uniform 1200-hour change interval across the full S2 series lineup — spanning from the S232 to the S352 SCR — indicates a consistent coolant service schedule regardless of engine output differences between the individual models.

Other Systems