Valtra (Valmet) M100
Manual transmission fluid capacity & service interval
Valtra (Valmet) M100 manual transmission fluid capacity is 27 liter. Service intervals include checking every 500 hours and changing every 1000 hours or 12 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 600 (1998-2002) |
|
| 700 (1998-2002) |
|
| 800 (1998-2002) |
|
| 900 (1998-2002) |
|
Additional Notes
- The Valtra (Valmet) M100 carries a transaxle manual transmission fluid capacity of 27 liters across the 600, 700, 800, and 900 transmission variants for the 1998-2002 model years.
- A 27-liter capacity is characteristic of an agricultural tractor transaxle, where the transmission, rear axle, and hydraulic system often share a common fluid reservoir, resulting in substantially higher volumes than passenger vehicle transmissions.
- The fluid check interval is set at 500 hours under normal use conditions, placing a routine inspection at the halfway point between drain intervals.
- The fluid change interval is specified at 1000 hours or 12 months under normal use conditions, meaning whichever threshold is reached first would govern the service timing in practice.
- The 12-month calendar limit alongside the 1000-hour operational limit reflects that fluid degradation occurs through both time-based aging and operational stress, even when hour accumulation is low.
- All four transmission variants — 600, 700, 800, and 900 — share an identical 27-liter capacity and the same check and change intervals, indicating a uniform transaxle specification across the M100 range for 1998-2002.