Valtra (Valmet) M series

Brake fluid capacity & service interval

Valtra (Valmet) M series brake fluid capacity is 0,3 liter. Service intervals include checking every 12 months or 500 hours and changing every 2000 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
M120 (2003-2009)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
M130 (2003-2009)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
M150 (2003-2009)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
XM130 (2003-2009)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
XM150 (2003-2009)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) M series hydraulic brake system holds a capacity of 0.3 liter across all five configurations covered — M120, M130, M150, XM130, and XM150 — for the 2003-2009 model years.
  • A 0.3 liter capacity is a relatively small reservoir volume, consistent with a dedicated hydraulic brake circuit rather than a shared or integrated hydraulic system with higher fluid demands.
  • The check interval for the hydraulic brake system is set at 12 months or 500 hours under normal use conditions, whichever comes first, applying uniformly across all configurations in the 2003-2009 range.
  • The change interval is specified at 2000 hours or 24 months under normal use conditions, again consistent across all five configurations without variation by model designation.
  • The dual-trigger structure of both the check and change intervals — combining a time-based threshold with an hours-based threshold — reflects the variable operating patterns typical of agricultural machinery, where annual hours can differ significantly between seasons and farm operations.
  • No specification variation exists between the standard M-prefix models (M120, M130, M150) and the XM-prefix models (XM130, XM150) with respect to brake fluid capacity or service intervals, as all rows carry identical values.

Other Systems