Valpadana Jupiter

Coolant capacity & service interval

Valpadana Jupiter uses coolant with a capacity range of 2 to 2,7 liters. Service intervals require a change every 1000 hours or 12 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Jupiter 40 (1540) Euro 1 (1999-2003)
  • Use: Normal
  • Capacity 2 liter
  • Change 1000 hours/ 12 months
Jupiter 45 (1545) Euro 1 (1999-2003)
  • Use: Normal
  • Capacity 2,7 liter
  • Change 1000 hours/ 12 months
Jupiter 50 (1550) Euro 1 (1999-2003)
  • Use: Normal
  • Capacity 2,7 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • The Valpadana Jupiter 40 (1540) Euro 1 carries a cooling system capacity of 2 liters, which is noticeably smaller than the 2.7-liter figure shared by the Jupiter 45 (1545) and Jupiter 50 (1550) Euro 1 variants.
  • The Jupiter 45 and Jupiter 50 share an identical cooling system capacity of 2.7 liters, despite being distinct model configurations within the same Euro 1 lineup from 1999-2003.
  • All three configurations specify a service interval of 1000 hours or 12 months under normal use conditions, meaning coolant replacement is tied to whichever threshold is reached first.
  • The hour-based interval of 1000 hours is a standard measure in agricultural and industrial equipment, reflecting operational time rather than distance, as tractors accumulate engine hours rather than road mileage.
  • The 12-month calendar interval runs alongside the 1000-hour threshold across all three Jupiter Euro 1 variants, so a machine with low annual operating hours would still require a coolant change within a year.
  • The capacity difference between the Jupiter 40 at 2 liters and the Jupiter 45 and 50 at 2.7 liters suggests a physically larger cooling circuit in the higher-output models, consistent with greater engine displacement or thermal load requirements.

Other Systems