Universal All models

Manual transmission fluid capacity & service interval

Universal All models use manual transmission fluid with a capacity of 11,1 liters. Service intervals include checking at 250 hours and changing at 1000 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
U 1010, DTC (1983-1996)
  • Use: Normal
  • Capacity 11,1 liter
  • Check 250 hours
  • Change 1000 hours
U 850, DTC (1983-1996)
  • Use: Normal
  • Capacity 11,1 liter
  • Check 250 hours
  • Change 1000 hours

Additional Notes

  • Both the U 1010 DTC and U 850 DTC carry a manual transmission fluid capacity of 11.1 liters, a volume consistent with heavy-duty industrial or agricultural transmission housings rather than typical passenger vehicle units.
  • The 11.1-liter figure represents a service fill capacity, meaning the amount of fluid the transmission holds during normal operation, as opposed to a dry or overhaul fill which would account for additional fluid retained in passages and components during a full rebuild.
  • Under normal use conditions, the specified check interval for both the U 1010 DTC and U 850 DTC is every 250 hours of operation, a time-based measurement standard in machinery where odometer readings are not applicable.
  • The change interval under normal use conditions is set at 1000 hours for both transmission types, placing the fluid change at four times the frequency of the check interval across the 1983-1996 coverage period.
  • The identical capacity and interval specifications across the U 1010 DTC and U 850 DTC suggest a shared transmission architecture between the two model designations within the 1983-1996 range.

Other Systems