Universal All models

Brake fluid capacity & service interval

Universal All models use brake fluid with a capacity range of 0,8 to 1,2 liters. Service intervals require a check every 10 hours. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
U 453 (1989-1996)
  • Use: Normal
  • Capacity 1,2 liter
  • Check 10 hours
U 453 DT (1989-1996)
  • Use: Normal
  • Capacity 1,2 liter
  • Check 10 hours
U 533 (1989-1996)
  • Use: Normal
  • Capacity 1,2 liter
  • Check 10 hours
U 533 DT (1989-1996)
  • Use: Normal
  • Capacity 1,2 liter
  • Check 10 hours
U 703 (1989-1996)
  • Use: Normal
  • Capacity 1,2 liter
  • Check 10 hours
U 703 DT (1989-1996)
  • Use: Normal
  • Capacity 1,2 liter
  • Check 10 hours
U 1010, DTC (1983-1996)
  • Use: Normal
  • Capacity 0,8 liter
U 850, DTC (1983-1996)
  • Use: Normal
  • Capacity 0,8 liter

Additional Notes

  • The Universal U 1010 and U 850 (both in DTC configuration, 1983-1996) share a hydraulic brake system capacity of 0.8 liters, which is notably lower than the 1.2-liter figure specified for the other models in this group.
  • The Universal U 453, U 533, and U 703 — each available in standard and DT configurations from 1989-1996 — all carry a hydraulic brake system capacity of 1.2 liters, indicating a larger fluid volume requirement consistent with more extensive braking circuit layouts.
  • A 10-hour check interval is specified for the U 453, U 453 DT, U 533, U 533 DT, U 703, and U 703 DT models. In hour-based service schedules typical of agricultural and utility machinery, intervals are measured by engine operating hours rather than distance, making 10 hours a very frequent inspection point.
  • No check interval is listed for the U 1010 DTC or U 850 DTC hydraulic brake systems, in contrast to the 10-hour check interval assigned to the six models introduced from 1989 onward.
  • The DT designation across the U 453 DT, U 533 DT, and U 703 DT variants shares identical brake fluid capacity and check interval values with their non-DT counterparts, indicating no difference in hydraulic brake system volume between those paired configurations.
  • All eight configurations carry a normal use condition, meaning the stated capacities and intervals apply to standard operating conditions rather than a modified severe-use schedule.

Other Systems