Shibaura S series
Differential fluid capacity & service interval
Shibaura S series differential fluid capacity ranges from 3 to 5 liters. Service intervals include checking at 50 hours and changing at 300 hours. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The Shibaura S series front differential fluid capacity splits into two distinct values across the 2000-2008 model range: the S 330 HST holds 3 liters, while the S 330 SSS, S 435 SSS, S 445 HSS, and S 455 HSS each hold 5 liters.
- The 3-liter front differential capacity on the S 330 HST is notably lower than the 5-liter figure shared by the remaining four models, a difference that reflects the HST transmission configuration's distinct drivetrain architecture compared to the SSS and HSS variants.
- All five configurations share an identical check interval of every 50 hours of operation under normal use conditions, applied uniformly across the S 330 HST, S 330 SSS, S 435 SSS, S 445 HSS, and S 455 HSS.
- The front differential fluid change interval is set at 300 hours for all five models under normal use conditions, meaning the check interval at 50 hours occurs six times before a full fluid change is due.
- The S 330 SSS and S 435 SSS share identical front differential specifications, with a 5-liter capacity, a 50-hour check interval, and a 300-hour change interval, despite representing different model designations within the S series lineup.
- The S 445 HSS and S 455 HSS also carry the same 5-liter front differential capacity and the same 50-hour check and 300-hour change intervals, indicating a consistent fluid service schedule across the upper HSS variants for the 2000-2008 period.