Shibaura S series
Coolant capacity & service interval
Shibaura S series coolant capacity ranges from 4 to 8 liters. Service intervals include checks every 10 hours and changes every 12 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| S 330 HST (2000-2008) |
|
| S 330 SSS (2000-2008) |
|
| S 435 SSS (2000-2008) |
|
| S 445 HSS (2000-2008) |
|
| S 455 HSS (2000-2008) |
|
Additional Notes
- The Shibaura S series cooling system capacities across the 2000-2008 range span from 4 liters on the lower end to 8 liters on the higher end, reflecting the differences in engine displacement between the smaller and larger models in the lineup.
- The S 330 HST carries a 4-liter cooling system capacity, which is the smallest figure across all five configurations listed for the 2000-2008 period.
- The S 330 SSS holds a 6.2-liter cooling system capacity, a notable step up from the HST variant of the same S 330 designation, indicating a meaningfully larger cooling circuit despite sharing the same model number prefix.
- The S 435 SSS shares the 6.2-liter cooling system capacity with the S 330 SSS, placing two distinct model designations at the same fill volume for the 2000-2008 span.
- The S 445 HSS and S 455 HSS both carry an 8-liter cooling system capacity, representing the largest coolant volume across all five configurations in the 2000-2008 range.
- All five configurations share a 10-hour interval for coolant level checks under normal use conditions, a frequency consistent with routine operational monitoring on compact utility tractors where coolant loss can go unnoticed between longer service events.
- A 12-month change interval applies uniformly across all five configurations under normal use conditions, meaning coolant replacement is tied to calendar time rather than operating hours for the S series cooling system.