Same Silver 3

Differential fluid capacity & service interval

Same Silver 3 uses differential fluid with a capacity of 6 liters. Service intervals include checks at 250 hours and changes at 1000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Silver 3 100, ->10001 (2010-2014)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours/ 24 months
  • Silver 3 100 Continuo (2010-2014)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours/ 24 months
  • Silver 3 110, ->15001 (2010-2014)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours/ 24 months
  • Silver 3 110 Continuo (2010-2014)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours/ 24 months

Additional Notes

  • The Same Silver 3 front differential holds 6 liters of fluid across all four configurations covered — the 100 Continuo, 100 (->10001), 110 Continuo, and 110 (->15001) — for the 2010-2014 model years.
  • A 6-liter front differential capacity is relatively substantial for agricultural equipment of this class, reflecting the mechanical demands placed on the front axle drive system during field operation.
  • All four configurations share an identical check interval of 250 hours under normal use conditions, meaning fluid level inspections are required well before a full drain-and-fill service becomes due.
  • The change interval is set at 1000 hours or 24 months under normal use conditions, whichever comes first, applying uniformly across the 100 and 110 engine variants in both Continuo and standard serial-range builds.
  • The dual-trigger change interval — combining an hour-based threshold with a calendar-based one — means a machine with low annual operating hours would still require a fluid change within 24 months regardless of accumulated engine time.
  • No variation in front differential fluid capacity or service intervals exists between the 100 and 110 power variants, indicating a shared front axle assembly across both engine outputs within the 2010-2014 Silver 3 range.
  • The Continuo designation and the serial-number-bounded variant (->10001 for the 100, ->15001 for the 110) also share identical specifications, suggesting no differential assembly change was introduced at those production cutoff points.

Other Systems