Same Silver 3

Automatic transmission fluid capacity & service interval

Same Silver 3 automatic transmission fluid capacity is 52 liters. Service intervals include checks at 50 hours and changes at 1000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Silver 3 100, ->10001 (2010-2014)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months
Silver 3 100 Continuo (2010-2014)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months
Silver 3 110, ->15001 (2010-2014)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months
Silver 3 110 Continuo (2010-2014)
  • Use: Normal
  • Capacity 52 liter
  • Check 50 hours
  • Change 1000 hours/ 24 months

Additional Notes

  • The Same Silver 3 transaxle/transmission carries a fluid capacity of 52 liters, which is a substantial fill volume consistent with large agricultural powershift or continuously variable transmission housings that integrate both the gearbox and axle drive components into a single shared sump.
  • A fluid check interval of every 50 hours applies across all four configurations listed, meaning the transmission fluid level is verified far more frequently than a full drain-and-fill service is performed.
  • The change interval is set at 1000 hours or 24 months under normal use conditions, whichever comes first, combining an operational hour threshold with a calendar-based limit to account for machines that may accumulate hours slowly.
  • The Silver 3 100 Continuo and the Silver 3 100 up to serial number 10001 share identical transaxle/transmission specifications, with the same 52-liter capacity, 50-hour check, and 1000-hour/24-month change interval across the 2010-2014 model years.
  • The Silver 3 110 Continuo and the Silver 3 110 up to serial number 15001 also carry the same 52-liter capacity and identical service intervals as the 100-series configurations, indicating no variation in transmission fluid specifications between the 100 and 110 power variants within the 2010-2014 range.
  • The serial number breakpoints noted for the Silver 3 100 (up to 10001) and Silver 3 110 (up to 15001) suggest production-based configuration boundaries, where the specifications listed apply specifically to units within those serial ranges rather than to the entire production run of each model.

Other Systems