Same Diamond
Differential fluid capacity & service interval
Same Diamond differential fluid capacity ranges from 8,5 to 13 liters. Service intervals include checks at 50 and 250 hours, and changes at 1000 hours or 12 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The Same Diamond 230 and Diamond 260 built between 2000-2007 share an identical front differential fluid capacity of 13 liters, a notably large volume reflecting the heavier-duty axle assemblies common to agricultural tractors of that generation.
- The 2008-2014 Diamond 230 DCR variants, differentiated by serial number prefixes WSXJ360200LS10001 and WSXL880200LS10001, both carry a front differential capacity of 8.5 liters, representing a reduction of 4.5 liters compared to the pre-DCR 230 specification.
- The Diamond 270 DCR unit identified by serial number prefix WSXJ370200LS10001 shares the 8.5-liter front differential capacity and the standard 250-hour check interval with the 230 DCR variants from the same 2008-2014 period.
- The Diamond 270 DCR variant identified by serial number prefix WSXL910200LS10001 carries the same 8.5-liter front differential capacity and the same 1000-hour or 12-month change interval as the other DCR configurations, but specifies a 50-hour check interval rather than the 250-hour interval listed for all other rows.
- A 50-hour check interval, as seen on the WSXL910200LS10001 variant, is typically associated with more frequent monitoring requirements, whether due to a break-in period, a specific axle design, or operating conditions that increase the likelihood of early fluid contamination or level change.
- Across all six configurations spanning 2000-2014, the front differential fluid change interval is consistently set at 1000 hours or 12 months under normal use conditions, whichever comes first. The time-based threshold of 12 months accounts for fluid degradation that can occur independently of machine operating hours.
- The serial number boundary notation used for the 2008-2014 DCR variants indicates that specifications apply to units up to a specific chassis number, a common method in agricultural equipment documentation to distinguish production batches that may share a model name but differ in mechanical specification.