Ropa Panther

Manual transmission fluid capacity & service interval

Ropa Panther manual transmission fluid capacity ranges from 7,7 to 8,5 liters. Service intervals include checks at 50 hours, changes at 50 hours, and changes every 12 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Panther, Tier 4f (2014- )
  • Use: Normal
  • Capacity 8,5 liter
  • Check 50 hours
  • Change 12 months
  • Code: 2/1
Panther, Tier 4f (2014- )
  • Use: First change only
  • Capacity 8,5 liter
  • Change 50 hours
  • Code: 2/1
Panther 2, TAD1643VE-B (2014- )
  • Use: Normal
  • Capacity 7,7 liter
  • Check 50 hours
  • Change 12 months
  • Code: 2/1

Additional Notes

  • The Ropa Panther with the Tier 4f engine carries a manual transmission fluid capacity of 8,5 liters, while the Panther 2 fitted with the TAD1643VE-B engine holds 7,7 liters, a difference of 0,8 liters between the two configurations starting from 2014.
  • A 7,7-liter fluid capacity in the Panther 2 TAD1643VE-B manual transmission indicates a substantial sump volume, consistent with heavy-duty agricultural machinery where larger fluid reserves support thermal stability under prolonged field operation.
  • The Tier 4f variant specifies a first-change interval of 50 hours, a separate service event from the standard annual change cycle. First-change intervals are used to flush manufacturing residues and initial wear particles from a new or freshly serviced transmission.
  • Following the first change, the Tier 4f manual transmission fluid is changed on a 12-month cycle under normal use conditions, regardless of accumulated operating hours beyond the initial 50-hour flush.
  • Both the Panther 2 TAD1643VE-B and the Tier 4f configurations share a 50-hour fluid check interval under normal use, meaning fluid level or condition is verified at that frequency without necessarily requiring a full drain and refill.
  • The 12-month change interval on both configurations is tied to normal use conditions, meaning the annual schedule applies when the machine is not subjected to operating conditions that would otherwise accelerate fluid degradation.

Other Systems