Renault Temis

Differential fluid capacity & service interval

Renault Temis differential fluid capacity is 6 liters. Service intervals include checks at 200 hours and 250 hours, and fluid changes at 800 hours or 12 months, 1000 hours, and 1000 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Temis 550 X (2000-2004)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 200 hours
  • Change 800 hours/ 12 months
  • Code: (4x4)
  • Temis 610 X/Z (2000-2004)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: (4x4)
  • Temis 630 X/Z (2000-2004)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • Temis 650 X/Z (2000-2004)
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: (4x4)

Additional Notes

  • All four Renault Temis configurations covered in the 2000-2004 range share an identical front differential fluid capacity of 6 liters, a uniform fill volume across the 550 X, 610 X/Z, 630 X/Z, and 650 X/Z variants.
  • The Temis 550 X carries a front differential fluid check interval of 200 hours under normal use conditions, which is shorter than the 250-hour check interval specified for the 610 X/Z, 630 X/Z, and 650 X/Z configurations.
  • The Temis 550 X front differential fluid change interval is set at 800 hours or 12 months under normal use, meaning whichever threshold arrives first would trigger a fluid change.
  • The 610 X/Z and 650 X/Z share a front differential fluid change interval of 1000 hours with no calendar-based interval listed alongside, unlike the 550 X and 630 X/Z which both carry a 12-month time condition paired with their hour-based intervals.
  • The Temis 630 X/Z specifies a front differential fluid change at 1000 hours or 12 months under normal use, aligning with the 550 X in applying a dual hour-and-calendar threshold rather than an hours-only interval.
  • The 250-hour check interval shared by the 610 X/Z, 630 X/Z, and 650 X/Z represents a periodic inspection point rather than a full fluid change, serving as an intermediate monitoring step before the 1000-hour change interval is reached.

Other Systems