Renault Temis

Brake fluid capacity & service interval

Renault Temis brake fluid capacity is 1 liter. Service intervals include checks at 600 hours and 750 hours, with changes at 800 hours or 12 months and 750 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Temis 550 X (2000-2004)
  • Use: Normal
  • Capacity 1 liter
  • Check 600 hours
  • Change 800 hours/ 12 months
Temis 610 X/Z (2000-2004)
  • Use: Normal
  • Capacity 1 liter
  • Check 750 hours
  • Change 750 hours
Temis 630 X/Z (2000-2004)
  • Use: Normal
  • Capacity 1 liter
  • Check 750 hours
  • Change 750 hours
Temis 650 X/Z (2000-2004)
  • Use: Normal
  • Capacity 1 liter
  • Check 750 hours
  • Change 750 hours

Additional Notes

  • The Renault Temis hydraulic brake system holds 1 liter of brake fluid across all four configurations covered in the 2000-2004 range, indicating a consistent reservoir volume regardless of variant.
  • A 1-liter capacity in a hydraulic brake system of this type reflects a service fill volume, meaning the quantity required to maintain or replenish the system under normal operating conditions rather than a full overhaul fill.
  • The Temis 550 X carries a check interval of 600 hours, which is shorter than the 750-hour check interval shared by the 610 X/Z, 630 X/Z, and 650 X/Z configurations.
  • The Temis 550 X has a change interval expressed in dual terms: 800 hours or 12 months, whichever comes first under normal use conditions. The hour-based and calendar-based thresholds running in parallel reflect the variable nature of agricultural equipment operation, where annual usage hours can differ significantly between seasons.
  • The 610 X/Z, 630 X/Z, and 650 X/Z all share an identical change interval of 750 hours, with no calendar-based alternative listed alongside the hour threshold, unlike the 550 X.
  • On the Temis 550 X, the check interval of 600 hours falls before the 800-hour change interval, meaning at least one fluid inspection occurs within the same service cycle before a full change is due.
  • On the 610 X/Z, 630 X/Z, and 650 X/Z, the check and change intervals are set at the same 750-hour mark, meaning the inspection and fluid replacement coincide within a single service event rather than being staged separately.

Other Systems