Reform Muli

Manual transmission fluid capacity & service interval

Reform Muli manual transmission fluid capacity ranges from 10 to 13 liters. Service intervals include checks at 200 hours and changes at 600 hours or 24 to 36 months. The data covers 11 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Muli 440 (1992-2000)
  • Use: Normal
  • Capacity 10 liter
  • Check 200 hours
  • Change 600 hours/ 24 months
Muli 550 (1992-2000)
  • Use: Normal
  • Capacity 10 liter
  • Check 200 hours
  • Change 600 hours/ 24 months
Muli 560 (1992-2000)
  • Use: Normal
  • Capacity 10 liter
  • Check 200 hours
  • Change 600 hours/ 24 months
Muli 660 (Kubota) (1992-2000)
  • Use: Normal
  • Capacity 13 liter
  • Check 200 hours
  • Change 600 hours/ 36 months
  • Muli 660 (Kubota) (1992-2000)
  • With limited slip differential
  • Use: Normal
  • Capacity 13 liter
  • Check 200 hours
  • Change 600 hours/ 36 months
Muli 660 (Peugeot) (1992-2000)
  • Use: Normal
  • Capacity 13 liter
  • Check 200 hours
  • Change 600 hours/ 36 months
  • Muli 660 (Peugeot) (1992-2000)
  • With limited slip differential
  • Use: Normal
  • Capacity 13 liter
  • Check 200 hours
  • Change 600 hours/ 36 months
Muli 770 (Kubota) (1992-2000)
  • Use: Normal
  • Capacity 13 liter
  • Check 200 hours
  • Change 600 hours/ 36 months
  • Muli 770 (Kubota) (1992-2000)
  • With limited slip differential
  • Use: Normal
  • Capacity 13 liter
  • Check 200 hours
  • Change 600 hours/ 36 months
Muli 770 (Peugeot) (1992-2000)
  • Use: Normal
  • Capacity 13 liter
  • Check 200 hours
  • Change 600 hours/ 36 months
  • Muli 770 (Peugeot) (1992-2000)
  • With limited slip differential
  • Use: Normal
  • Capacity 13 liter
  • Check 200 hours
  • Change 600 hours/ 36 months

Additional Notes

  • The Reform Muli 440, 550, and 560 share an identical transaxle fluid capacity of 10 liters, while all Muli 660 and 770 variants carry a larger 13-liter capacity. In manual transaxle servicing, capacity figures reflect the total volume of the combined transmission and axle housing, which in agricultural and utility vehicles tends to be substantially higher than in passenger car gearboxes.
  • The 10-liter transaxle capacity on the Muli 440, 550, and 560 pairs with a change interval of 600 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger structure, combining an operating-hour threshold with a calendar limit, is standard practice for machinery that may accumulate hours unevenly across seasons.
  • All Muli 660 and 770 variants, regardless of engine fitment or differential configuration, share a 600-hour change interval paired with a 36-month calendar limit. The extended calendar window of 36 months, compared to the 24 months on the smaller models, reflects a longer time-based threshold before fluid degradation is considered a concern under normal operating conditions.
  • A fluid level check interval of 200 hours applies uniformly across all Muli variants from the 440 through the 770. Periodic checks at this interval allow detection of leaks or consumption between full drain-and-fill service events without requiring a complete fluid change.
  • The Muli 660 and 770 are each available with either a Kubota or Peugeot engine fitment, yet both engine variants within each model share the same 13-liter transaxle capacity and identical service intervals. The transaxle specifications are therefore independent of the engine supplier for those models.
  • Within the Muli 660 and 770 lineups, configurations equipped with a limited slip differential carry the same 13-liter capacity and 600-hour or 36-month change interval as the standard open-differential versions. A limited slip differential typically requires a fluid compatible with friction modifier requirements, making the configuration note relevant to fluid type selection even when capacity and interval remain unchanged.

Other Systems