Reform Muli

Brake fluid capacity & service interval

Reform Muli uses brake fluid with a capacity of 0,6 liter. Service intervals include checks every 100 hours and changes every 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Muli 440 (1992-2000)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 100 hours
  • Change 24 months
Muli 550 (1992-2000)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 100 hours
  • Change 24 months
Muli 560 (1992-2000)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 100 hours
  • Change 24 months
Muli 660 (Kubota) (1992-2000)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 100 hours
  • Change 24 months
Muli 660 (Peugeot) (1992-2000)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 100 hours
  • Change 24 months
Muli 770 (Kubota) (1992-2000)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 100 hours
  • Change 24 months
Muli 770 (Peugeot) (1992-2000)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 100 hours
  • Change 24 months

Additional Notes

  • The Reform Muli brake fluid capacity of 0.6 liter applies to the hydraulic brake system, which is a closed circuit of lines, a master cylinder, and wheel cylinders or calipers. A 0.6 liter total system volume is characteristic of a compact utility vehicle with a relatively simple hydraulic layout.
  • The 100-hour check interval is an operating-hours-based schedule, common in agricultural and utility machinery where annual mileage is not a meaningful measure of wear. At 100 hours, the fluid level and condition are assessed without a mandatory replacement at that point.
  • The 24-month change interval runs independently of operating hours. Brake fluid is hygroscopic, meaning it absorbs moisture from the atmosphere over time, which lowers its boiling point regardless of how many hours the machine has been in use.
  • The 0.6 liter capacity, the 100-hour check, and the 24-month change interval are identical across all seven Muli variants covered in the 1992-2000 range, spanning the 440, 550, 560, 660, and 770 model designations.
  • The Muli 660 and Muli 770 were each available with either a Kubota or a Peugeot engine. Despite the difference in engine origin, the hydraulic brake system capacity and service intervals are the same across both engine variants within each model, indicating the brake circuit was not engine-dependent in specification.

Other Systems