New Holland TD4000F

Brake fluid capacity & service interval

New Holland TD4000F brake fluid capacity is 0,4 liter. Service intervals require a check every 10 hours. Data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TD4020F (2009-2012)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 10 hours
TD4030F (2009-2012)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 10 hours
TD4040F (2009-2012)
  • Use: Normal
  • Capacity 0,4 liter
  • Check 10 hours

Additional Notes

  • The New Holland TD4000F series covers three configurations in the brake fluid specifications: the TD4020F, TD4030F, and TD4040F, all spanning the 2009-2012 model years.
  • Each configuration carries a hydraulic brake system capacity of 0.4 liter, a relatively small volume consistent with a dedicated brake fluid reservoir rather than a combined hydraulic circuit.
  • The 0.4 liter figure represents a service fill capacity, meaning the amount held within the brake fluid reservoir under normal operating conditions rather than a full system overhaul volume.
  • A check interval of 10 hours is specified across all three configurations under normal use conditions, reflecting the frequent inspection demands typical of agricultural equipment operating in field environments.
  • The 10-hour check interval is notably short compared to many fluid service schedules, which aligns with the hydraulic brake system note, as brake fluid condition and level in tractor applications can be affected by heat cycling and mechanical stress during regular field work.
  • The capacity and check interval values are identical across the TD4020F, TD4030F, and TD4040F, indicating no variation in brake fluid specifications between the three model variants within the 2009-2012 range.

Other Systems