New Holland TD-D
Brake fluid capacity & service interval
New Holland TD-D brake fluid capacity is 0,4 liter. Service intervals consist of a check every 10 hours. The data covers 9 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| TD 55D (2004-2008) |
|
| TD 60D (2004-2008) |
|
| TD 65D (2004-2008) |
|
| TD 70D (2004-2008) |
|
| TD 75D (2004-2008) |
|
| TD 80D (2004-2008) |
|
| TD 85D (2004-2008) |
|
| TD 90D (2004-2008) |
|
| TD 95D (2004-2008) |
|
Additional Notes
- The New Holland TD-D series spans nine variants from the TD 55D through the TD 95D, all produced during the 2004-2008 model years, and all share an identical hydraulic brake system fluid capacity of 0.4 liter.
- A 0.4 liter capacity is characteristic of a compact, closed hydraulic brake circuit. In agricultural tractors, hydraulic braking systems of this type use fluid primarily to actuate brake components rather than to store large volumes, which accounts for the relatively small reservoir size.
- The check interval for the hydraulic brake system across all TD-D variants is every 10 hours of operation. In tractor service schedules, a 10-hour interval is among the most frequent, reflecting the importance of monitoring brake fluid condition and level during regular daily or near-daily use.
- The 10-hour check interval applies under normal use conditions for all nine TD-D variants. In service specification terminology, a normal use condition refers to standard operating environments without the additional stress factors that would otherwise trigger more demanding severe-use schedules.
- The uniformity of the 0.4 liter capacity and the 10-hour check interval across all nine variants, from the TD 55D to the TD 95D, indicates that the hydraulic brake system architecture remained consistent throughout the TD-D range despite the differences in engine output implied by the model designations.