New Holland T4V

Differential fluid capacity & service interval

New Holland T4V differential fluid capacity is 4 liters. Service intervals include checking at 300 hours and changing at 1200 hours or 24 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • T4.100V (2020- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T4.110V (2020- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T4.120V (2020- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T4.80V (2020- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T4.90V (2020- )
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T4.105V (2012-2014)
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T4.65V (2012-2014)
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T4.75V (2012-2014)
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T4.85V (2012-2014)
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T4.95V (2012-2014)
  • Front
  • Use: Normal
  • Capacity 4 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The front differential fluid capacity across all New Holland T4V configurations listed is 4 liters. In drivetrain service, a capacity figure at this scale typically reflects a service fill volume rather than a full overhaul or disassembly fill, which would generally require additional fluid to account for passages and cavities not reached during a standard drain-and-fill procedure.
  • The check interval for front differential fluid is set at 300 hours across all T4V variants listed. A 300-hour check interval is a periodic inspection point, not a fluid replacement event, and is intended to verify fluid level and condition without necessarily requiring a full fluid change at that interval.
  • The fluid change interval is specified at 1200 hours or 24 months, whichever comes first, for all listed T4V configurations. The dual-trigger format means calendar time can mandate a change even when the hour threshold has not been reached, which is relevant for machines operating at lower annual usage rates.
  • All specifications listed apply under normal use conditions. In agricultural equipment service documentation, normal use conditions are distinguished from severe use conditions, which typically involve more demanding environments such as heavy dust, extreme temperatures, or continuous high-load operation. No severe-use interval variation is present in the listed specifications.
  • The T4V lineup covered by these specifications spans two distinct model year groupings: the T4.65V, T4.75V, T4.85V, T4.95V, T4.105V from 2012-2014, and the T4.80V, T4.90V, T4.100V, T4.110V, T4.120V with a starting year of 2020. Despite the difference in model year groupings, the front differential fluid capacity and service intervals are identical across both generations.
  • The 2012-2014 group includes five model variants spanning the T4.65V through T4.105V designations, while the 2020 group includes five variants spanning the T4.80V through T4.120V. The numerical designations in the model names generally correspond to approximate horsepower ratings, indicating the T4V range covers a spread of power outputs across both generations.

Other Systems