New Holland T4V

Brake fluid capacity & service interval

The New Holland T4V uses brake fluid with a capacity range of 0.5-0.8 liter depending on the configuration. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
T4.100V (2020- )
  • Use: Normal
  • Capacity 0,5-0,8 liter
T4.110V (2020- )
  • Use: Normal
  • Capacity 0,5-0,8 liter
T4.120V (2020- )
  • Use: Normal
  • Capacity 0,5-0,8 liter
T4.80V (2020- )
  • Use: Normal
  • Capacity 0,5-0,8 liter
T4.90V (2020- )
  • Use: Normal
  • Capacity 0,5-0,8 liter
T4.105V (2012-2014)
  • Use: Normal
  • Capacity 0,5-0,7 liter
T4.65V (2012-2014)
  • Use: Normal
  • Capacity 0,5-0,7 liter
T4.75V (2012-2014)
  • Use: Normal
  • Capacity 0,5-0,7 liter
T4.85V (2012-2014)
  • Use: Normal
  • Capacity 0,5-0,7 liter
T4.95V (2012-2014)
  • Use: Normal
  • Capacity 0,5-0,7 liter

Additional Notes

  • All brake fluid capacities listed for the New Holland T4V series apply to the hydraulic brake system under normal use conditions.
  • The 2012-2014 T4V variants, covering the T4.65V, T4.75V, T4.85V, T4.95V, T4.105V, share a capacity range of 0.5-0.7 liter for the hydraulic brake system.
  • The 2020 T4V variants, covering the T4.80V, T4.90V, T4.100V, T4.110V, and T4.120V, carry a slightly wider capacity range of 0.5-0.8 liter for the hydraulic brake system.
  • A capacity expressed as a range rather than a fixed value reflects the variable fill level acceptable within the hydraulic brake system reservoir, with the lower figure representing a minimum acceptable level and the upper figure the maximum fill point.
  • The upper capacity limit of 0.8 liter on the 2020 variants is 0.1 liter higher than the 0.7 liter upper limit on the 2012-2014 variants, indicating a difference in reservoir sizing or system volume between the two generations.
  • The shared lower boundary of 0.5 liter across all T4V variants, regardless of model year, points to a consistent minimum fluid volume requirement across the hydraulic brake system design used throughout the series.

Other Systems