New Holland T4F

Coolant capacity & service interval

New Holland T4F coolant capacity ranges from 10,5 to 14 liters. Service intervals include checks every 10 hours and changes every 1200 hours or 24 months, or every 3600 hours or 48 months. The data covers 13 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
T4.100F (2020- )
  • Use: Normal
  • Capacity 14 liter
T4.110F (2020- )
  • Use: Normal
  • Capacity 14 liter
T4.120F (2020- )
  • Use: Normal
  • Capacity 14 liter
T4.80F (2020- )
  • Use: Normal
  • Capacity 14 liter
T4.90F (2020- )
  • Use: Normal
  • Capacity 14 liter
T4.105F (2012-2014)
  • Use: Normal
  • Capacity 10,5-12,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
T4.105F (2012-2014)
  • Use: Extended
  • Capacity 10,5-12,5 liter
  • Check 10 hours
  • Change 48 months/ 3600 hours
T4.75F (2012-2014)
  • Use: Normal
  • Capacity 10,5-12,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
T4.75F (2012-2014)
  • Use: Extended
  • Capacity 10,5-12,5 liter
  • Check 10 hours
  • Change 48 months/ 3600 hours
T4.85F (2012-2014)
  • Use: Normal
  • Capacity 10,5-12,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
T4.85F (2012-2014)
  • Use: Extended
  • Capacity 10,5-12,5 liter
  • Check 10 hours
  • Change 48 months/ 3600 hours
T4.95F (2012-2014)
  • Use: Normal
  • Capacity 10,5-12,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
T4.95F (2012-2014)
  • Use: Extended
  • Capacity 10,5-12,5 liter
  • Check 10 hours
  • Change 48 months/ 3600 hours

Additional Notes

  • The New Holland T4F cooling system capacity splits into two distinct values depending on the model generation. The 2012-2014 variants — T4.75F, T4.85F, T4.95F, and T4.105F — share a capacity range of 10.5 to 12.5 liters, while the 2020 variants across the T4.80F, T4.90F, T4.100F, T4.110F, and T4.120F all carry a fixed 14-liter capacity.
  • The variable capacity of 10.5 to 12.5 liters listed for the 2012-2014 models reflects a range rather than a single fixed value, which is common when a cooling system fill volume differs slightly depending on whether air pockets are fully purged or whether an optional heater circuit is included in the system.
  • A fixed 14-liter capacity on the 2020 models represents a notable increase over the 10.5 to 12.5-liter range of the 2012-2014 generation, consistent with larger or more thermally demanding engine configurations requiring greater coolant volume.
  • The 2012-2014 models specify a coolant level check interval of every 10 hours of operation under both normal and extended use conditions. A 10-hour check interval is unusually short and typically reflects a break-in or early monitoring requirement rather than a routine ongoing schedule.
  • Under normal use conditions, the 2012-2014 T4.75F, T4.85F, T4.95F, and T4.105F all share a coolant change interval of 1,200 hours or 24 months, whichever comes first. The dual-trigger format means calendar time and operational hours are both active limits, and the first threshold reached governs the service event.
  • Under extended use conditions, the same 2012-2014 models carry a coolant change interval of 3,600 hours or 48 months. Extended-life coolant formulations — typically organic acid technology (OAT) or similar long-life chemistries — are what justify the longer drain interval compared to conventional coolant used under normal conditions.
  • The extended-use change interval of 48 months or 3,600 hours represents exactly double the calendar interval and three times the hour-based interval of the normal-use specification for the 2012-2014 models, reflecting the significantly greater additive longevity of extended-life coolant types.
  • No change interval or check interval is listed for the 2020 T4F variants. Only a capacity figure of 14 liters appears in the specifications for the T4.80F, T4.90F, T4.100F, T4.110F, and T4.120F, making the capacity the sole service data point available for those models.

Other Systems