New Holland T4F

Brake fluid capacity & service interval

New Holland T4F brake fluid capacity ranges from 0.2 to 0.8 liters depending on the configuration. The fluid type specified is brake fluid for normal use. The data covers 9 different configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
T4.100F (2020- )
  • Use: Normal
  • Capacity 0,5-0,8 liter
T4.110F (2020- )
  • Use: Normal
  • Capacity 0,5-0,8 liter
T4.120F (2020- )
  • Use: Normal
  • Capacity 0,5-0,8 liter
T4.80F (2020- )
  • Use: Normal
  • Capacity 0,5-0,8 liter
T4.90F (2020- )
  • Use: Normal
  • Capacity 0,5-0,8 liter
T4.105F (2012-2014)
  • Use: Normal
  • Capacity 0,2-0,5 liter
T4.75F (2012-2014)
  • Use: Normal
  • Capacity 0,2-0,5 liter
T4.85F (2012-2014)
  • Use: Normal
  • Capacity 0,2-0,5 liter
T4.95F (2012-2014)
  • Use: Normal
  • Capacity 0,2-0,5 liter

Additional Notes

  • All specifications listed cover the hydraulic brake system across New Holland T4F variants, with capacity figures expressed as ranges rather than fixed values to account for variation during service fills.
  • The T4.75F, T4.85F, T4.95F, and T4.105F, all from the 2012-2014 model years, share a brake fluid capacity range of 0.2-0.5 liter under normal use conditions.
  • The T4.80F, T4.90F, T4.100F, T4.110F, and T4.120F, introduced from 2020 onward, carry a noticeably wider and higher capacity range of 0.5-0.8 liter under normal use conditions.
  • The capacity range difference between the two generation groups is consistent across all variants within each group, with the later models specifying a range that starts where the earlier models' range ends.
  • A capacity expressed as a range, rather than a single fixed value, is typical for hydraulic brake systems where the reservoir level is checked and topped off rather than fully drained and refilled in routine service.
  • All entries are designated for normal use conditions, meaning the capacity figures apply to standard operating environments without adjustment for severe-duty or heavy-load service classifications.
  • The 2012-2014 group covers four distinct model designations — T4.75F, T4.85F, T4.95F, and T4.105F — each sharing identical brake fluid capacity specifications despite differences in power output implied by their model numbers.
  • The five variants in the later group — T4.80F, T4.90F, T4.100F, T4.110F, and T4.120F — likewise share a uniform brake fluid capacity range, indicating a standardized hydraulic brake system architecture across that generation.

Other Systems