New Holland T3.F

Differential fluid capacity & service interval

New Holland T3.F differential fluid capacity ranges from 3 to 4,5 liters. Service intervals include checks every 300 hours and changes every 1200 hours or 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • T3.60F (2018- )
  • Front
  • Use: Normal
  • Capacity 3 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T3.70F (2018- )
  • Front
  • Use: Normal
  • Capacity 3 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T3.80F (2018- )
  • Front
  • Use: Normal
  • Capacity 3 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T3.50F (2014-2019)
  • Front
  • Use: Normal
  • Capacity 4,5 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T3.55F (2014-2019)
  • Front
  • Use: Normal
  • Capacity 4,5 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T3.65F (2014-2019)
  • Front
  • Use: Normal
  • Capacity 4,5 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months
  • T3.75F (2014-2019)
  • Front
  • Use: Normal
  • Capacity 4,5 liter
  • Check 300 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The New Holland T3.F series front differential capacity splits into two distinct values depending on the model variant: 4.5 liters for the T3.50F, T3.55F, T3.65F, and T3.75F, and 3 liters for the T3.60F, T3.70F, and T3.80F.
  • A 4.5-liter front differential fill is a relatively substantial volume for a compact utility tractor, reflecting the physical size of the axle housing and the amount of fluid needed to maintain adequate lubrication across all internal gear surfaces.
  • The 3-liter capacity on the T3.60F, T3.70F, and T3.80F represents a 33 percent reduction compared to the 4.5-liter figure, which points to a different front axle assembly design used across those variants.
  • All seven variants share an identical service interval structure: a fluid level check at 300 hours and a full fluid change at 1,200 hours or 24 months, whichever comes first. The dual-trigger change interval means time elapsed can mandate a service even when the hour threshold has not been reached.
  • The 300-hour check interval is a monitoring step rather than a fluid replacement, allowing verification of fluid level and condition without a full drain-and-fill procedure.
  • All specifications listed apply under normal use conditions. Normal use in agricultural equipment contexts generally refers to standard field and road operation without sustained extreme loads, high-temperature environments, or frequent water crossings that would otherwise shorten service intervals.
  • The T3.50F, T3.55F, T3.65F, and T3.75F share not only the same 4.5-liter capacity but also the same 2014-2019 model year range, indicating a consistent front axle specification across that group throughout the production period covered.
  • The T3.60F, T3.70F, and T3.80F all carry a starting year of 2018, meaning the 3-liter front differential specification is associated exclusively with variants introduced from 2018 onward within the T3.F lineup.

Other Systems