New Holland T3.F

Brake fluid capacity & service interval

New Holland T3.F brake fluid capacity is 0,4 liter. Service intervals include a check at 10 hours and a change at 2000 hours. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
T3.60F (2018- )
  • Use: Normal
  • Capacity 0,4 liter
  • Check 10 hours
  • Change 2000 hours
T3.70F (2018- )
  • Use: Normal
  • Capacity 0,4 liter
  • Check 10 hours
  • Change 2000 hours
T3.80F (2018- )
  • Use: Normal
  • Capacity 0,4 liter
  • Check 10 hours
  • Change 2000 hours
T3.50F (2014-2019)
  • Use: Normal
  • Capacity 0,4 liter
T3.55F (2014-2019)
  • Use: Normal
  • Capacity 0,4 liter
T3.65F (2014-2019)
  • Use: Normal
  • Capacity 0,4 liter
T3.75F (2014-2019)
  • Use: Normal
  • Capacity 0,4 liter

Additional Notes

  • Across all New Holland T3.F variants listed, the hydraulic brake system capacity is uniformly 0.4 liter, a relatively small volume consistent with a compact tractor brake circuit rather than a large integrated hydraulic reservoir.
  • The T3.50F, T3.55F, T3.65F, and T3.75F, all covering the 2014-2019 model years, carry capacity-only entries with no check or change interval specified in the provided data.
  • The T3.60F, T3.70F, and T3.80F, each with a starting year of 2018, share an identical service schedule: a brake fluid check at 10 hours and a full fluid change at 2000 hours under normal use conditions.
  • A 10-hour initial check interval on the T3.60F, T3.70F, and T3.80F is characteristic of a break-in inspection point, intended to confirm system integrity shortly after a machine enters service.
  • The 2000-hour change interval on the three 2018-onward variants represents a substantial service period for a compact tractor, reflecting the relatively low thermal and mechanical stress placed on a hydraulic brake circuit compared to engine oil or transmission fluid systems.
  • All seven variants specify normal use conditions, meaning the listed capacity and interval figures apply to standard operating environments rather than severe-duty or high-stress applications.
  • The consistent 0.4-liter capacity across both the 2014-2019 and 2018-onward model groups suggests the hydraulic brake circuit volume remained unchanged across the T3.F range despite the introduction of newer variants.

Other Systems