Massey Ferguson 7200

Coolant capacity & service interval

Massey Ferguson 7200 uses coolant with a capacity range of 30 to 50 liters. Service intervals include checks every 10 hours and changes every 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
7250 (2000-2002)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 24 months
7252 (2000-2002)
  • Use: Normal
  • Capacity 30 liter
  • Check 10 hours
  • Change 24 months
7254 (2000-2002)
  • Use: Normal
  • Capacity 48 liter
  • Check 10 hours
  • Change 24 months
7256 (2000-2002)
  • Use: Normal
  • Capacity 48 liter
  • Check 10 hours
  • Change 24 months
7272 (2000-2002)
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 24 months
7274 (CEREA) (2000-2002)
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 24 months
7276 (2000-2002)
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 24 months
7278 (CEREA) (2000-2002)
  • Use: Normal
  • Capacity 50 liter
  • Check 10 hours
  • Change 24 months

Additional Notes

  • Across the Massey Ferguson 7200 series (2000-2002), cooling system capacities fall into three distinct groups: 30 liters for the 7250 and 7252, 48 liters for the 7254 and 7256, and 50 liters for the 7272, 7274 (CEREA), 7276, and 7278 (CEREA). The stepped increase in capacity reflects the larger engine displacements associated with higher-numbered models in the range.
  • A 30-liter cooling system capacity, as specified for the 7250 and 7252, represents a relatively modest volume for agricultural tractor applications and is consistent with smaller-displacement engines that generate less heat load under normal working conditions.
  • The 48-liter capacity of the 7254 and 7256 represents a 60 percent increase over the 30-liter figure, indicating a substantially larger engine block and greater thermal management requirements for those models.
  • The 7272, 7274 (CEREA), 7276, and 7278 (CEREA) share a 50-liter cooling system capacity, the largest in the 7200 series for this period. A 50-liter system is characteristic of high-output engines where sustained heavy-duty operation demands significant coolant volume to maintain stable operating temperatures.
  • The CEREA designation appears on the 7274 and 7278 models, distinguishing specific variants within the upper tier of the range. Both share the same 50-liter cooling system capacity as the non-CEREA 7272 and 7276.
  • A 10-hour check interval applies uniformly across all eight models. In agricultural equipment, a 10-hour interval corresponds roughly to daily inspection frequency during active field seasons, allowing early detection of coolant level loss or contamination before engine damage occurs.
  • The 24-month coolant change interval is consistent across all models in the 7200 series for this period. A time-based interval of this length is standard for conventional ethylene glycol coolants, which degrade in corrosion inhibitor effectiveness over approximately two years regardless of operating hours accumulated.

Other Systems