Massey Ferguson 7200

Automatic transmission fluid capacity & service interval

Massey Ferguson 7200 uses automatic transmission fluid with a capacity range of 7,5 to 10,5 liters. Service intervals include checking every 100 hours and changing every 500 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 7250 (2000-2002)
  • Hydrostatic
  • Use: Normal
  • Capacity 7,5 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 3/3
  • 7252 (2000-2002)
  • Hydrostatic
  • Use: Normal
  • Capacity 7,5 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 3/3
  • 7254 (2000-2002)
  • Hydrostatic
  • Use: Normal
  • Capacity 7,5 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 3/3
  • 7256 (2000-2002)
  • Hydrostatic
  • Use: Normal
  • Capacity 10,5 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 3/3
  • 7272 (2000-2002)
  • Hydrostatic
  • Use: Normal
  • Capacity 10,5 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 3/3
  • 7274 (CEREA) (2000-2002)
  • Hydrostatic
  • Use: Normal
  • Capacity 9,5 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 4/4
  • 7276 (2000-2002)
  • Hydrostatic
  • Use: Normal
  • Capacity 9,5 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 4/4
  • 7278 (CEREA) (2000-2002)
  • Hydrostatic
  • Use: Normal
  • Capacity 9,5 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 4/4

Additional Notes

  • Across the Massey Ferguson 7200 series (2000-2002), the combined transmission and hydrostatic system capacity falls into three distinct values: 7.5 liters for the 7250, 7252, and 7254; 10.5 liters for the 7256 and 7272; and 9.5 liters for the 7274 CEREA, 7276, and 7278 CEREA. In hydrostatic transmission systems, a higher fluid capacity generally reflects a larger hydraulic circuit volume, which is typical in higher-output or more complex drivetrain configurations.
  • The 7256 and 7272 share the largest capacity in the lineup at 10.5 liters. In agricultural machinery, a larger combined transmission and hydrostatic fluid volume often corresponds to greater heat dissipation requirements and more extensive hydraulic circuitry within the drivetrain.
  • The 7250, 7252, and 7254 share the smallest capacity at 7.5 liters. Within the same model family, a lower fluid volume in the combined transmission and hydrostatic system typically indicates a less complex or lower-displacement hydraulic circuit relative to higher-numbered variants.
  • The 7274 CEREA and 7278 CEREA carry a 9.5-liter capacity, placing them between the two other capacity groups. The CEREA designation on these models distinguishes a specific variant within the 7200 series, and the intermediate fluid volume reflects a configuration distinct from both the standard lower and upper capacity groupings.
  • All eight models across the 2000-2002 range share an identical check interval of every 100 hours. In agricultural equipment, a 100-hour fluid level check is a standard preventive measure aligned with typical seasonal or intensive-use operating cycles.
  • The fluid change interval for all listed models is 500 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger structure, combining an operating-hour threshold with a calendar limit, accounts for machines that accumulate hours slowly and would otherwise leave fluid in service beyond a reasonable time period regardless of usage.
  • All specifications across the eight models are designated for normal use conditions. In service interval terminology, normal use typically refers to operation within standard load, temperature, and environmental parameters, as opposed to severe conditions that would shorten recommended intervals.

Other Systems