Massey Ferguson 6600

Coolant capacity & service interval

Massey Ferguson 6600 uses coolant with a capacity range of 18 to 24,5 liters. Service intervals include checking every 10 hours and changing every 1500 hours or 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 6612 Dyna-4 (2013-2016)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
MF 6613 Dyna-4 (2013-2016)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
MF 6613 Dyna-6 (2013-2016)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
MF 6614 Dyna-VT (2013-2016)
  • Use: Normal
  • Capacity 24,5 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
MF 6615 Dyna-4 (2013-2016)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
MF 6615 Dyna-6 (2013-2016)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
MF 6615 Dyna-VT (2013-2016)
  • Use: Normal
  • Capacity 24,5 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
MF 6616 Dyna-6 (2013-2016)
  • Use: Normal
  • Capacity 18 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
MF 6616 Dyna-VT (2013-2016)
  • Use: Normal
  • Capacity 24,5 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months

Additional Notes

  • Across the Massey Ferguson 6600 series (2013-2016), cooling system capacity falls into one of two values: 18 liters or 24.5 liters, depending on the transmission variant fitted to each model.
  • The 18-liter capacity applies to all Dyna-4 and Dyna-6 variants across the MF 6612, 6613, 6615, and 6616 models, indicating a consistent cooling system volume for those transmission configurations.
  • The 24.5-liter capacity is specific to Dyna-VT variants, appearing on the MF 6614, 6615, and 6616. The larger volume reflects the additional thermal management demands associated with continuously variable transmission systems, which generate and transfer more heat than stepped-ratio gearboxes.
  • The MF 6615 is the only model in the range specified with all three transmission types — Dyna-4, Dyna-6, and Dyna-VT — making the capacity difference between configurations directly observable within a single model designation.
  • A 10-hour check interval applies uniformly across all configurations listed. In agricultural equipment, a 10-hour interval corresponds roughly to daily inspection during active use, allowing early detection of coolant loss or contamination before extended operation.
  • The coolant change interval of 1500 hours or 24 months, whichever comes first, is consistent across every row in the specifications. The dual-trigger format means calendar time governs the interval during low-utilization periods, while operating hours govern during intensive seasonal use.
  • At typical agricultural workloads, 1500 operating hours can represent several years of seasonal use, meaning the 24-month calendar limit is likely to be the governing factor for many operators rather than the hour-based threshold.
  • The MF 6613 is listed in two separate configurations — Dyna-4 and Dyna-6 — both sharing the 18-liter capacity and identical service intervals, indicating the transmission type does not affect cooling system volume or maintenance scheduling for that model.

Other Systems