Massey Ferguson 6600

Automatic transmission fluid capacity & service interval

Massey Ferguson 6600 uses automatic transmission fluid with a capacity range of 52 to 70 liters. Service intervals include checking every 10 hours and changing every 1500 to 2000 hours or 24 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 6612 Dyna-4 (2013-2016)
  • Use: Normal
  • Capacity 57-65 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
  • Code: Dyna-4
MF 6613 Dyna-4 (2013-2016)
  • Use: Normal
  • Capacity 57-65 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
  • Code: Dyna-4
MF 6613 Dyna-6 (2013-2016)
  • Use: Normal
  • Capacity 57-65 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
  • Code: Dyna-6
MF 6614 Dyna-VT (2013-2016)
  • Use: Normal
  • Capacity 52 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Code: Dyna-VT
MF 6615 Dyna-4 (2013-2016)
  • Use: Normal
  • Capacity 56-70 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
  • Code: Dyna-4
MF 6615 Dyna-6 (2013-2016)
  • Use: Normal
  • Capacity 56-70 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
  • Code: Dyna-6
MF 6615 Dyna-VT (2013-2016)
  • Use: Normal
  • Capacity 52 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Code: Dyna-VT
MF 6616 Dyna-6 (2013-2016)
  • Use: Normal
  • Capacity 56-70 liter
  • Check 10 hours
  • Change 1500 hours/ 24 months
  • Code: Dyna-6
MF 6616 Dyna-VT (2013-2016)
  • Use: Normal
  • Capacity 52 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
  • Code: Dyna-VT

Additional Notes

  • Transaxle capacity figures across the Massey Ferguson 6600 series reflect the combined fluid volume shared by the transmission, rear axle, and hydraulic system, which is a common integrated arrangement in agricultural tractors of this type. A range such as 57-65 liters or 56-70 liters accounts for variation depending on installed rear axle configuration or optional equipment.
  • The MF 6614, MF 6615, and MF 6616 models equipped with the Dyna-VT transmission carry a fixed transaxle capacity of 52 liters, compared to the variable ranges specified for Dyna-4 and Dyna-6 variants. The Dyna-VT is a continuously variable transmission, and its different internal architecture accounts for the distinct fixed capacity figure.
  • The MF 6615 Dyna-4 and Dyna-6 variants share a wider capacity range of 56-70 liters, which is the broadest range listed across all 6600 configurations. The MF 6612 and MF 6613 Dyna-4 and Dyna-6 variants share a narrower range of 57-65 liters, reflecting differences in rear axle or hydraulic reservoir sizing between model grades.
  • All Dyna-VT configurations across the 2013-2016 range carry a fluid change interval of 2000 hours or 24 months, whichever comes first. Dyna-4 and Dyna-6 configurations are specified at 1500 hours or 24 months, making the calendar-based interval identical across all transmission types while the hour-based interval is longer for Dyna-VT units.
  • The 24-month calendar interval applies uniformly across all 6600 series configurations regardless of transmission type, meaning low-utilization machines reach a service point on time elapsed alone, independent of accumulated operating hours.
  • A fluid level check interval of 10 hours is specified for all configurations in the 6600 series. In agricultural equipment, a 10-hour check interval corresponds roughly to daily inspection during active field use, given that a standard working day in tractor operation is commonly measured in that range.
  • The MF 6613 is listed with two distinct transmission options, Dyna-4 and Dyna-6, both sharing identical transaxle capacity and service intervals. The Dyna-6 designation refers to a six-step powershift transmission, while Dyna-4 uses a four-step arrangement, yet the shared fluid specifications indicate the same transaxle housing is used across both variants in the 6613.

Other Systems