Massey Ferguson 4700

Differential fluid capacity & service interval

Massey Ferguson 4700 differential fluid capacity ranges from 4,4 to 5,5 liters. The data covers 22 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • MF 4707, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Code: Carraro
  • MF 4707, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana
  • MF 4707, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Code: Carraro
  • MF 4707, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana
  • MF 4707, Tier 4i (2016-2020)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Code: Carraro
  • MF 4707, Tier 4i (2016-2020)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana
  • MF 4708, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Code: Carraro
  • MF 4708, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana
  • MF 4708, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Code: Carraro
  • MF 4708, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana
  • MF 4708, Tier 4i (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Code: Carraro
  • MF 4708, Tier 4i (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana
  • MF 4708, Tier 4F (2016-2020)
  • Front
  • Use: Normal
  • Capacity 4,4 liter
  • Code: Carraro
  • MF 4708, Tier 4F (2016-2020)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana
  • MF 4709, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Code: Carraro
  • MF 4709, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana
  • MF 4709, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Code: Carraro
  • MF 4709, Tier II (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana
  • MF 4709, Tier 4i (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Code: Carraro
  • MF 4709, Tier 4i (2016-2018)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana
  • MF 4709, Tier 4F (2016-2020)
  • Front
  • Use: Normal
  • Capacity 4,4 liter
  • Code: Carraro
  • MF 4709, Tier 4F (2016-2020)
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Code: Dana

Additional Notes

  • Front differential fluid capacity across the Massey Ferguson 4700 series is listed with two distinct values per configuration: 5 liters and 5.5 liters. In drivetrain service, two capacity figures for the same component typically reflect a drain-and-refill volume versus a full overhaul or dry-fill volume, with the lower figure representing the amount needed after draining and the higher figure representing total system capacity when the housing is completely empty.
  • The MF 4708 and MF 4709 in Tier 4F configuration carry a lower capacity figure of 4.4 liters rather than the 5-liter figure seen in Tier 4i and Tier II variants. This difference indicates a physically distinct front differential assembly used in the Tier 4F emissions configuration, as the 4.4-liter value does not appear in any other emission tier across the 4700 series.
  • The MF 4707 is listed exclusively in Tier 4i and Tier II emission configurations, while the MF 4708 and MF 4709 each appear in Tier 4F, Tier 4i, and Tier II variants. The Tier 4F designation refers to a Final Tier 4 emissions standard, Tier 4i to an Interim Tier 4 standard, and Tier II to an earlier, less stringent EPA/EU emissions tier.
  • Tier 4i and Tier II front differential specifications for the MF 4707, MF 4708, and MF 4709 share identical capacity values of 5 liters and 5.5 liters, suggesting a common front axle assembly across those two emission tiers within each model designation.
  • The Tier 4i variants of the MF 4708 and MF 4709 are listed for model years 2016-2018, while the Tier 4F variants of the same models extend through 2020. The MF 4707 Tier 4i also covers 2016-2020, making the Tier 4i coverage year range model-dependent within the series.
  • All front differential fluid capacity specifications across the Massey Ferguson 4700 series are designated for normal use conditions, meaning none of the listed figures are adjusted for severe-duty operating environments in these specifications.

Other Systems