Massey Ferguson 4200

Differential fluid capacity & service interval

Massey Ferguson 4200 differential fluid capacity ranges from 5,6 to 7,6 liters. Service intervals include checks at 250 hours and changes at 1000 hours. The data covers 16 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • MF 4215 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 7,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 105
  • MF 4215 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 5,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 66/75/85
  • MF 4220 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 7,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 105
  • MF 4220 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 5,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 66/75/85
  • MF 4225 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 7,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 105
  • MF 4225 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 5,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 66/75/85
  • MF 4235 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 7,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 105
  • MF 4235 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 5,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 66/75/85
  • MF 4245 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 7,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 105
  • MF 4245 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 5,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 66/75/85
  • MF 4255 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 7,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 105
  • MF 4255 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 5,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 66/75/85
  • MF 4260 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 7,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 105
  • MF 4260 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 5,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 66/75/85
  • MF 4270 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 7,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 105
  • MF 4270 (1997-2001)
  • Front
  • Use: Normal
  • Capacity 5,6 liter
  • Check 250 hours
  • Change 1000 hours
  • Code: AG 66/75/85

Additional Notes

  • Every model in the Massey Ferguson 4200 series covered by these specifications — the 4215, 4220, 4225, 4235, 4245, 4255, 4260, and 4270 — carries two distinct front differential fluid capacities: 7.6 liters and 5.6 liters. The difference between the two figures reflects variations in front axle assembly size or configuration rather than model-to-model differences, since both values appear across all eight models without exception.
  • The 7.6-liter capacity represents the larger of the two front differential fill volumes listed for the 4200 series. In agricultural tractor applications, a higher differential capacity typically corresponds to a heavier-duty front axle unit, which requires a greater fluid volume to maintain adequate lubrication across all internal components.
  • The 5.6-liter capacity is the smaller front differential fill volume and applies to a lighter or more compact front axle variant. A 2-liter difference between the two capacities is significant and reflects a meaningfully different axle assembly rather than a minor measurement variation.
  • Fluid level checks for the front differential are specified at 250-hour intervals under normal use conditions across all models and both capacity variants. In tractor operation, 250 hours is a relatively frequent inspection interval, consistent with the mechanical demands placed on front axle differentials in field work.
  • The fluid change interval is set at 1,000 hours under normal use conditions, applying uniformly to all 4200 series models and both the 7.6-liter and 5.6-liter configurations. A 1,000-hour change interval is standard for agricultural equipment differentials operating under normal loads and terrain conditions.
  • The ratio between the check interval and the change interval is 1:4, meaning four fluid level inspections occur for every full fluid change. This cadence allows for early detection of fluid loss or contamination well before a scheduled drain and refill is due.
  • All specifications listed apply exclusively to normal use conditions. No severe-use intervals are listed for any model or capacity variant in these front differential specifications, meaning the 250-hour check and 1,000-hour change figures represent the sole defined service schedule across the entire 4200 series for this system.
  • The uniformity of service intervals across all eight models — regardless of the capacity variant — indicates that the check and change schedule is tied to the operating environment and fluid degradation rate rather than to the volume of fluid held in the differential housing.

Other Systems