Massey Ferguson 30/40

Manual transmission fluid capacity & service interval

Massey Ferguson 30/40 manual transmission fluid capacity is 11 liters. Service intervals include checking every 100 hours and changing every 500 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 34 (1991-2000)
  • Use: Normal
  • Capacity 11 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 3/3
MF 36 (1991-2000)
  • Use: Normal
  • Capacity 11 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 3/3
MF 38 (1991-2000)
  • Use: Normal
  • Capacity 11 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 3/3
MF 40 (1991-2000)
  • Use: Normal
  • Capacity 11 liter
  • Check 100 hours
  • Change 500 hours/ 24 months
  • Code: 3/3

Additional Notes

  • The Massey Ferguson 30/40 series manual transaxle fluid capacity is 11 liters across all four models covered by the specifications — the MF 34, MF 36, MF 38, and MF 40 — for the 1991-2000 model years.
  • An 11-liter transaxle capacity is a relatively substantial fill volume, consistent with agricultural equipment where the transmission housing also serves integrated functions such as rear axle and differential lubrication within a shared sump.
  • The fluid check interval is set at 100 hours of operation under normal use conditions, which in agricultural equipment terms reflects a routine inspection point rather than a full service event.
  • The fluid change interval is 500 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger structure means time elapsed can mandate a change even when the hour threshold has not been reached.
  • All four models — MF 34, MF 36, MF 38, and MF 40 — share identical capacity, check, and change intervals with no variation across the model range for the 1991-2000 period covered in the specifications.

Other Systems