Massey Ferguson 30/40

Coolant capacity & service interval

Massey Ferguson 30/40 requires coolant with a capacity of 32 liters. Service intervals include checks every 50 hours and changes every 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 34 (1991-2000)
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 24 months
MF 36 (1991-2000)
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 24 months
MF 38 (1991-2000)
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 24 months
MF 40 (1991-2000)
  • Use: Normal
  • Capacity 32 liter
  • Check 50 hours
  • Change 24 months

Additional Notes

  • The Massey Ferguson 30/40 series cooling system capacity is 32 liters across the MF 34, MF 36, MF 38, and MF 40 models, a figure consistent with the larger coolant volumes typical of agricultural machinery where extended thermal management is required during prolonged field operation.
  • The 32-liter capacity is uniform across all four models in the 1991-2000 range, indicating no variation in cooling system volume between the different model designations within the series.
  • A coolant check interval of 50 hours applies to all four models under normal use conditions, reflecting the relatively frequent monitoring intervals common in hour-metered equipment where operating loads can vary significantly between sessions.
  • The change interval for all four models is set at 24 months under normal use conditions, a time-based interval rather than an hour-based one, meaning calendar time governs coolant replacement regardless of accumulated operating hours.
  • The combination of a 50-hour check interval alongside a 24-month change interval means coolant condition is monitored on an operational basis while replacement follows a fixed calendar schedule, treating degradation as time-dependent rather than load-dependent.

Other Systems