Massey Ferguson 3000

Differential fluid capacity & service interval

Massey Ferguson 3000 differential fluid capacity ranges from 5,8 to 6,5 liters. Service intervals include checks at 100 and 250 hours, with changes at 1000 hours or 12 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • MF 3055 (1993-1995)
  • Front
  • Use: Normal
  • Capacity 5,8 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • MF 3075 (1993-1995)
  • Front
  • Use: Normal
  • Capacity 6,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • MF 3085 (1992-1995)
  • Front
  • Use: Normal
  • Capacity 6,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • MF 3095 (1990-1995)
  • Front
  • Use: Normal
  • Capacity 6,5 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • MF 3050 (1986-1995)
  • Front
  • Use: Normal
  • Capacity 5,8 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • MF 3060 (1986-1993)
  • Front
  • Use: Normal
  • Capacity 5,8 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • MF 3065/S (1986-1995)
  • Front
  • Use: Normal
  • Capacity 5,8 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • MF 3070 (1986-1994)
  • Front
  • Use: Normal
  • Capacity 6,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • MF 3080 (1986-1992)
  • Front
  • Use: Normal
  • Capacity 6,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)
  • MF 3090 (1986-1990)
  • Front
  • Use: Normal
  • Capacity 6,5 liter
  • Check 250 hours
  • Change 1000 hours/ 12 months
  • Code: (4x4)

Additional Notes

  • The front differential fluid capacity across the Massey Ferguson 3000 series splits into two distinct values: 5.8 liters for the MF 3050, 3055, 3060, and 3065/S, and 6.5 liters for the MF 3070, 3075, 3080, 3085, 3090, and 3095. This difference reflects the larger front axle assemblies fitted to the higher-powered models in the range.
  • All ten models share a uniform fluid change interval of 1000 hours or 12 months under normal use conditions, whichever comes first. The time-based limit of 12 months accounts for fluid degradation that can occur independently of operating hours, particularly in machines used infrequently.
  • The check interval is not uniform across the series. The MF 3065/S (1986-1995), MF 3085 (1992-1995), and MF 3095 (1990-1995) carry a 100-hour check interval, while the remaining seven models are specified at 250 hours. A shorter check interval means the fluid level and condition are monitored more frequently between full changes.
  • The MF 3050 covers the full 1986-1995 span of the series, while the MF 3055 and MF 3075 entered production later, with specifications beginning in 1993. Both share the same front differential capacity as their respective lower- and higher-displacement counterparts from earlier in the range.
  • The MF 3060 (1986-1993) and MF 3080 (1986-1992) have production windows that close before the series end date, and both carry the 250-hour check interval alongside the 5.8-liter and 6.5-liter capacities respectively. Their successors, the MF 3065/S and MF 3085, retain the same fluid capacities but specify the more frequent 100-hour check interval.
  • The MF 3090 (1986-1990) and MF 3095 (1990-1995) together cover the full 1986-1995 period for the top of the range. The MF 3095 carries the 100-hour check interval, whereas the MF 3090 is specified at 250 hours, despite both sharing the 6.5-liter front differential capacity.

Other Systems