Massey Ferguson 3000

Coolant capacity & service interval

Massey Ferguson 3000 uses coolant with a capacity range of 16 to 25 liters. Service intervals include checking at 100 hours and changing at 1000 hours or 12 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MF 3055 (1993-1995)
  • Use: Normal
  • Capacity 16 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 3075 (1993-1995)
  • Use: Normal
  • Capacity 20 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 3085 (1992-1995)
  • Use: Normal
  • Capacity 25 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 3095 (1990-1995)
  • Use: Normal
  • Capacity 25 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 3050 (1986-1995)
  • Use: Normal
  • Capacity 16 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 3060 (1986-1993)
  • Use: Normal
  • Capacity 16 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 3065/S (1986-1995)
  • Use: Normal
  • Capacity 16 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 3070 (1986-1994)
  • Use: Normal
  • Capacity 20 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 3080 (1986-1992)
  • Use: Normal
  • Capacity 25 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months
MF 3090 (1986-1990)
  • Use: Normal
  • Capacity 25 liter
  • Check 100 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • Across the Massey Ferguson 3000 series, cooling system capacity falls into three distinct tiers: 16 liters for the 3050, 3055, 3060, and 3065/S; 20 liters for the 3070 and 3075; and 25 liters for the 3080, 3085, 3090, and 3095. The stepped increase in capacity reflects the progressively larger engine displacements found in the higher-numbered models within the range.
  • The Massey Ferguson 3080 carries a 25-liter cooling system capacity, which is notably 56 percent greater than the 16-liter figure specified for the 3050. In agricultural equipment, larger coolant volumes generally correspond to higher-output engines that generate more heat under sustained load conditions.
  • All ten models share an identical check interval of every 100 hours of operation under normal use conditions. In tractor service schedules, a coolant check at this frequency typically involves inspecting the level, concentration, and visible condition of the coolant rather than a full drain and refill.
  • The change interval across all models is specified at 1000 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger format means a tractor used lightly enough to avoid 1000 hours in a year would still require a coolant change on the annual calendar threshold.
  • The 3055 and 3075 share production start years of 1993, and both carry the same capacity figures as their respective predecessor models, the 3050 at 16 liters and the 3070 at 20 liters. The service intervals for both are also unchanged from the earlier variants.
  • The 3065/S designation covers a span of 1986-1995, making it one of the longer production windows in the series alongside the 3050. Both models share the 16-liter cooling system capacity and the same 100-hour check and 1000-hour/12-month change intervals throughout that period.
  • The 3090 and 3095 together cover the period 1986-1995 with overlapping production years of 1990-1995 for the 3095. Both are specified at 25 liters, and the service intervals are identical, indicating no cooling system service differentiation between the two models despite their sequential relationship.

Other Systems